BlueAnt Wireless SUPERTOOTH II manual Voice Dialing, Redial, Kit to Phone, Phone to Kit

The most direct method is by using the Phone keypad.

4.Tap the number on the phone’s keypad, and then press the DIAL key on the

phone.

Note: Audio will be heard directly on the Supertooth. At times, for first time dialing, audio will be heard on the phone and not immediately on the Supertooth. If this is the case you have to press once on the Pick-Up/Hang-UpButton to transfer the audio to the Kit.

5.To terminate the call, press down the Hang-Up Button on the Supertooth or press End on the phone

Voice Dialing

Voice Dialling is not included in the Treo but is available as a software add-on. Set up voice commands for contact’s as per the Palm Voice Dial user manual. To activate voice dialing…

1.Press the Pick-Up/Hang-Up button once on the Supertooth, or press the Multi-Function button on the phone.

2.When prompted by a beep, say the name you wish to call.

Redial

Calls the last number dialed from the phone.

1.Press and hold for 3 seconds the Pick-Up/Hang-Up key on the Supertooth. e. AUDIO TRANSFER DURING A CALL

Kit to Phone

Flip down the Swivel Arm (1) to 0º position (or turn-off the unit). This will automatically transfer the audio from the kit to the phone.

Phone to Kit

Flip the Swivel Arm up from 0º to 55ºor 210º position (Turn-On the Kit). Then press shortly the Pick-Up/Hang-Up Button(7). The audio will be transferred from the phone to the kit.”

f.REJECTING A CALL

Rejecting a call can be done from the Phone by selecting IGNORE or from the Supertooth by pressing the Reject Button

Note: It is recommended to create a phone profile to use with the Supertooth. Configure phone volume and ring settings to suit your cars environment.

g.RECONNECTING SUPERTOOTH

After turning the SuperTooth back on, Press the Pick-Up/Hang-Up key on the SuperTooth once to Reconnect.

52