Indesit KD6G25X, KDP60G manual Space for Fixing, Cooker Hoods

Page 26

Installation

SPACE FOR FIXING

The cooker can be close fitted below hotplate level. This requires a minimum distance of 600mm between cupboard units of hotplate height.

When installing next to a tall cupboard, partition or wall, for a minimum distance of 400mm above hotplate level, allow a side clearance of at least 65mm.

The diagram below illustrates the minimum clearance between the cooker and adjacent walls, cupboards etc.

The wall behind the cooker, 50mm below and 450mm above, and the width of the cooker, must be a non-combustible material such as ceramic wall tiles.

If the cooker is to be fitted close to a corner on the left hand side, ensure that there is a clearance of at least 50mm to allow the main oven door to open fully for when removing oven shelves.

400 mm Min

Min
750mm	65 mm Min
750mm

600 mm Min

COOKER HOODS

If a cooker hood is to be installed, refer to the cooker hood manufacturers’ instructions regarding fixing height.

26

Image 26

Contents Free Standing Gas Cooker Contents Introduction For your Safety Please read the precautions below before using your cookerNever 00.00 12.00 Clock and Minute Minder00.20 13.23 Hotplate To USE the HotplateSafety Requirements for Deep FAT Frying HOW to Deal with a FAT FireGrill Grill PAN and HandleTo USE the Grill Relighting the BurnerMain Oven To USE the Main OvenStorage and RE-HEATING of Food Cold Start CookingRoasting of Large Poultry ‘COOK CHILL’ DishesMain Oven Cooking Chart Meat and PoultryCAKES, Pastries and Biscuits Top Oven Guidance on Using the TOP Oven To USE the TOP OvenTop Oven Cooking Chart CAKES, Pastries and BiSCUITS Care and Cleaning Replacement of Oven Light BulbCooker Finish Cleaning Method Problem Check Something Wrong with your CookerAmount of smoke When grill / oven used First time Oven cooks too fastSlight odour or small Or too slowModel Numbers KD6G25X, KDP60G InstallationGAS Safety Installation & USE Regulations LocationBurner Technical DataG20 at 20mbar G30 at 28-30mbar G31 at 37mbar Space for Fixing Cooker HoodsConversion for USE on Butane G30 or Propane G31 Unpacking the CookerLevelling Connecting to GAS Supply Stability ChainElectrical Connection Connect to a 230-240V A.C. Supply onlyInstallation and Operational Checks Contact the Service Office UK 08709 066 If it Still Won’t WorkGenuine Parts and Accessories After Sales ServiceRepair Service and Information Help Desk Extended Warranties