Indesit KD6G25X, KDP60G manual Stability Chain, Connecting to GAS Supply

Page 28

Installation

STABILITY CHAIN

A hole in the gas inlet valve bracket can be used to engage a stability chain.

CONNECTING TO GAS SUPPLY

670

300

Connection to the cooker should be made with an approved appliance flexible connection to BS 669. A length of 0.9 to 1.25m is recommended. The length of hose chosen should be such that when the cooker is in situ, the hose does not touch the floor.

Those cookers converted to use on LPG should be connected with a hose suitable for LPG and capable of withstanding a pressure of 50 mbar.

An adaptor backplate should be fitted within the shaded area shown, to allow the cooker to be pushed fully to the wall and to ensure that the flexible hose is only likely to come into contact with areas at the rear of the cooker that do not exceed a temperature rise of 70˚C.

28

Image 28

Contents Free Standing Gas Cooker Contents Introduction For your Safety Please read the precautions below before using your cookerNever 00.00 12.00 Clock and Minute Minder00.20 13.23 Hotplate To USE the HotplateSafety Requirements for Deep FAT Frying HOW to Deal with a FAT FireGrill Grill PAN and HandleTo USE the Grill Relighting the BurnerMain Oven To USE the Main OvenCold Start Cooking Roasting of Large PoultryStorage and RE-HEATING of Food ‘COOK CHILL’ DishesMain Oven Cooking Chart Meat and PoultryCAKES, Pastries and Biscuits Top Oven Guidance on Using the TOP Oven To USE the TOP OvenTop Oven Cooking Chart CAKES, Pastries and BiSCUITS Care and Cleaning Replacement of Oven Light BulbCooker Finish Cleaning Method Problem Check Something Wrong with your CookerWhen grill / oven used First time Oven cooks too fast Slight odour or smallAmount of smoke Or too slowInstallation GAS Safety Installation & USE RegulationsModel Numbers KD6G25X, KDP60G LocationG20 at 20mbar G30 at 28-30mbar G31 at 37mbar Technical DataBurner Space for Fixing Cooker HoodsLevelling Unpacking the CookerConversion for USE on Butane G30 or Propane G31 Connecting to GAS Supply Stability ChainElectrical Connection Connect to a 230-240V A.C. Supply onlyInstallation and Operational Checks Contact the Service Office UK 08709 066 If it Still Won’t WorkAfter Sales Service Repair Service and Information Help DeskGenuine Parts and Accessories Extended Warranties