Indesit KDP60G, KD6G25X manual Safety Requirements for Deep FAT Frying, HOW to Deal with a FAT Fire

Page 9

Hotplate

SAFETY REQUIREMENTS FOR DEEP FAT FRYING

1.Never fill chip pans more than one third full with oil or fat.

2.Never leave oil or fat unattended during the heating or cooling period.

3.Never heat fat or fry with a lid on the pan.

4.Always dry food thoroughly before frying, and lower it slowly into the hot oil or fat. Frozen foods in particular will cause frothing and spitting if added too quickly.

5.Always keep the outside of the pan clean and free from streaks of oil or fat.

HOW TO DEAL WITH A FAT FIRE

1.Do not move the pan.

2.Turn off the hotplate burners.

3.Smother the flames with a fire blanket or damp cloth to extinguish the fire.

Do not use water or a fire extinguisher as the force of it may spread the burning fat or oil over the edge of the pan.

4.Leave the pan for at least 60 minutes before moving it.

9

Image 9
Contents Free Standing Gas Cooker Contents Introduction Please read the precautions below before using your cooker For your SafetyNever Clock and Minute Minder 00.00 12.0000.20 13.23 To USE the Hotplate HotplateHOW to Deal with a FAT Fire Safety Requirements for Deep FAT FryingGrill PAN and Handle GrillRelighting the Burner To USE the GrillTo USE the Main Oven Main OvenRoasting of Large Poultry Cold Start CookingStorage and RE-HEATING of Food ‘COOK CHILL’ DishesMeat and Poultry Main Oven Cooking ChartCAKES, Pastries and Biscuits Top Oven To USE the TOP Oven Guidance on Using the TOP OvenTop Oven Cooking Chart CAKES, Pastries and BiSCUITS Replacement of Oven Light Bulb Care and CleaningCooker Finish Cleaning Method Something Wrong with your Cooker Problem CheckSlight odour or small When grill / oven used First time Oven cooks too fastAmount of smoke Or too slowGAS Safety Installation & USE Regulations InstallationModel Numbers KD6G25X, KDP60G LocationTechnical Data G20 at 20mbar G30 at 28-30mbar G31 at 37mbarBurner Cooker Hoods Space for FixingUnpacking the Cooker LevellingConversion for USE on Butane G30 or Propane G31 Stability Chain Connecting to GAS SupplyConnect to a 230-240V A.C. Supply only Electrical ConnectionInstallation and Operational Checks If it Still Won’t Work Contact the Service Office UK 08709 066Repair Service and Information Help Desk After Sales ServiceGenuine Parts and Accessories Extended Warranties