John Lewis JLBIDO911 instruction manual Cleaning the outside of the appliance

Page 36

Cleaners that contain bleach should not be used as they may dull the surface finishes. Harsh abrasive and scourers should also be avoided.

Cleaning the outside of the appliance

Do not use abrasive cleaning materials e.g. abrasive cream cleaners, wire wool pads or scourers on painted or printed finishes as damage may occur. Regularly wipe over the control panel, control knobs, handles, doors and appliance sides using a soft cloth and hot soapy water. To prevent streaking, finish with a soft cloth.

Stainless Steel cream cleaners are abrasive and should be avoided as they may dull the surface finish. Any spillage on the stainless steel finish must be wiped off immediately.

Removing and replacing the wirework runners

1.Remove all shelves and furniture from the oven.

2.Hold the wirework at the bottom, unclip from the cavity side and gently pull towards the centre of the oven.

3.Unhook the runner at the top and remove from the cavity.

4.To replace the runners, hook the wirework side runner into the cavity, slide back and press into place.

Warning! Ensure the wirework runners are firmly in position before replacing the oven shelves.

Cleaning the shelves, wire-work runners and grill/oven furniture

All removable parts, except the grill pan handle can be washed in the dishwasher. The grill pan, grill pan grid, oven shelves and wirework runners may be cleaned using a soap impregnated steel wool pad. Soaking first in hot soapy water will make cleaning easier.

Cleaning inside the grill and oven compartments

The sides and back of the grill/second oven and main oven compartments are coated with a special Stayclean coating. They should not be cleaned manually.

The vitreous enamel main oven base and grill compartment base can be cleaned using normal oven cleaners with care. Ensure that the manufacturers instructions are followed and that all parts are well rinsed afterwards.

Warning! Aerosol cleaners must not come into contact with elements, the door seal, or any painted finishes as this may cause damage.

Warning! Aerosol cleaners must not be used on Stay-clean surfaces.

•To carry out the cleaning cycle, remove the oven shelves and set the oven to CAtA which is the cleaning setting.

•Press the Function selector until the required setting is illuminated.

•The display will show CAtA and the heat indicator will scroll until the required temperature is reached.

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents JLBIDO911 Important safety information InstallationChild safety UseMaintenance and cleaning Always use oven gloves to remove and place food in the ovenContents Before using the appliance Setting the language Setting the brightness of the displayCookware On/Off push buttonGrill and oven furniture Product description Control Panel Top Oven/Grill Main OvenControl panel 15 14 12 11Timer To cancel the countdownTo set the time of day To set the countdownTo set the oven timer control To set the timer to switch off onlyTo cancel an automatic programme Turn off the ovenTop multifunction oven setting guide Top multifunction ovenTo return the appliance to manual Automatic cookingUsing top oven grill To fit the top oven shelfTop oven grill Things to noteUsing top oven conventional cooking To fit the grill pan handleTop oven conventional cooking Cooling fan for the controls may operate after a timeUsing top oven base heat finishing Using top oven keep warmTop oven base heat finishing Top oven keep warmMultifunction oven setting guide Main multifunction ovenUsing main oven grill To fit the main oven shelvesMain oven grill Cooking temperatures Using main oven fan cookingMain oven fan cooking PreheatingUsing main oven pizza Using main oven conventional cookingMain oven pizza Main oven conventional cookingUsing main oven turbo grilling Main oven turbo grillCooking times Low temperature cooking Using main oven low temperature cookingUsing defrost Using main oven keep warmUsing main oven base heat finishing Main oven defrostOther convenient functions Switching on after a cut- out Temperature reviewUsing fast heat-up Selecting fast heat-upCooking charts Grilling chartTurbo grilling chart Top oven cooking chart Main oven conventional cooking chart Food Shelf position Temp Cooking Time Total HoursShelf position Temp Cooking Time Total Hours Main oven fan cooking chart Roasting chart Hints and tips when using the grill Hints and tipsFood should be turned over during cooking as required Hints and tips when turbo grilling Hints and tips when using the top ovenHints and tips when using main oven conventional cooking Hints and tips when using fan cooking Hints and tips when using pizzaHints and tips when defrosting Something not workingAlways cook thoroughly immediately after thawing Maintenance and cleaning Cleaning materialsCleaning the outside of the appliance Cleaning inside the grill and oven compartmentsCleaning the doors To remove the Inner glassHousehold detergents and bleaches To replace the inner door glass Replacing an oven light bulb main ovenEnvironmental information Replacing an oven light bulb top ovenRepairs after sales service Spare partsInstallation Choice of electrical connectionDo not alter the electrical circuitry of this appliance Preparing cabinet for fitting of oven Important! It is good practice toRecommended cabinet dimensions in millimetres 558How to finish unpacking Connecting to the mains terminalTo remove cover of mains terminal Lift cover and remove screw from cable clampConnecting to a hob or cooker point Checking electrical connectionsFitting into the cabinet Technical data Page 311804300-A-012008
Top Page Image Contents