Multiquip WM-70P (Plastic) WM-70 PLASTER/MORTAR Mixer Rules for Safe Operation, Read this manual

Page 10

WM-70 PLASTER/MORTAR MIXER — RULES FOR SAFE OPERATION

 

DANGER

Read this manual!

 

 

 

Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only.

The following safety guidelines should always be used when operating the WM-70 plaster and mortar mixer:

GENERAL SAFETY

DO NOT operate or service this equipment before reading this entire manual.

This equipment should not be operated by persons under 18 years of age.

NEVER operate this equipment without proper protective clothing, shatterproof glasses, steel-toed boots and other protective devices required by the job.

NEVER operate this equipment when not feeling well due to fatigue, llness or taking medicine.

NEVER operate this equipment under the influence of drugs or alcohol.

ALWAYS wear proper respiratory (mask), hearing and eye protection equipment when operating the mixer.

NEVER place hands inside the drum while the blades are rotating.

Whenever necessary, replace nameplate, operation and safety decals when they become difficult read.

Manufacture does not assume responsibility for any accident due to equipment modifications.

NEVER use accessories or attachments, which are not recommended by Multiquip for this equipment. Damage to the equipment and/or injury to user may result.

NEVER touch the hot exhaust manifold, muffler or cylinder. Allow these parts to cool before servicing

engine or mixer.

High Temperatures – Allow the engine to cool before adding fuel or

performing service and maintenance

functions. Contact with hot! components can cause serious burns.

The engine section of this mixer requires an adequate free flow of cooling air. NEVER operate the mixer in any enclosed or narrow area where free flow of the air is restricted. If the air flow is

restricted it will cause serious damage to the mixer or engine and may cause injury to people. Remember the mixer's engine gives off DEADLY carbon monoxide gas.

ALWAYS refuel in a well-ventilated area, away from sparks and open flames.

ALWAYS use extreme caution when working with flammable liquids. When refueling, stop the engine and allow it to cool. DO NOT smoke around or near the machine. Fire or explosion could result from fuel vapors, or if fuel is spilled on a hot engine.

NEVER operate the mixer in an explosive atmosphere or near combustible materials. An explosion or fire could result causing severe bodily harm or even death.

Topping-off to filler port is dangerous, as it tends to spill fuel.

Stop the engine when leaving the mixer unattended.

Block the unit when leaving or when using on a slope.

Maintain this equipment in a safe operating condition at all times.

WARNING Starting the Mixer Engine

NEVER! start the engine or engage the paddle arms when the drum is in the discharge (down) position.

PAGE 10 — WM-70 PLASTER/MORTAR MIXER — OPERATION MANUAL — REV. #1 (08/09/04)

Image 10
Contents Model WM-70S Steel Model WM-70P Plastic Page Heres HOW to GET Help WM-70 PLASTER/MORTAR Mixer -TABLE of Contents Direct TOLL-FREE access WM-70 PLASTER/MORTAR Mixer Specifications WM-70 PLASTER/MORTAR Mixer Dimensions Description Dimensions in. cmBurn Hazards WM-70 PLASTER/MORTAR Mixer Safety Message Alert SymbolsRespiratory Hazards WM-70 PLASTER/MORTAR Mixer Safety Message Alert Symbols Equipment DamageWM-70 PLASTER/MORTAR Mixer Rules for Safe Operation Read this manualMixer when in use Stand ClearTow Bar to Vehicle Connection Coupler Only Towing Safety Precautions Regularly InspectWM-70 PLASTER/MORTAR Mixer -TOWING Guidelines ReplacingAlways Tow with WM-70 PLASTER/MORTAR Mixer Safety Chain ConnectionWhen Towing Tow Bar to Mixer ConnectionWM-70 PLASTER/MORTAR Mixer Operation and Safety Decals Machine Safety DecalsWM-70 PLASTER/MORTAR Mixer General Information WM-70 PLASTER/MORTAR Mixer Major Components Mixer ComponentsExplosive WM-70 PLASTER/MORTAR Mixer Engine ComponentsInitial Servicing Burn HazardElectric Motor WM-70 PLASTER/MORTAR Mixer Electric MotorElectric Motor Connection Electric Motor Voltage Switch WM-70 PLASTER/MORTAR Mixer Electric MotorWM-70 Mixer Paddle Blade Adjustment Steel Drum WM-70 Mixer Paddle Blade Adjustment Poly Drum Inspection WM-70 PLASTER/MORTAR Mixer InspectionBefore Starting Engine Oil CheckWM-70 PLASTER/MORTAR Mixer Inspection Start-up ProcedureGasonline Engine WM-70 PLASTER/MORTAR Mixer START-UP ProcedureRespiratory Hazard Engine ON/OFF Switch Dump Handle Safety Mixing DumpingWM-70 PLASTER/MORTAR Mixer Operation OFF positionWM-70 PLASTER/MORTAR Mixer Maintenance Engine Engine Maintenance ScheduleMaintenance WM-70 PLASTER/MORTAR Mixer Maintenance EngineExplosive Hazard Drum Head Seals WM-70 PLASTER/MORTAR Mixer Maintenance MixerBall Socket and Clamp Face Maintenance Drum Bearing Bracket LubricationInspect Tooth Contact between Main Gear and Drive Pinion WM-70 PLASTER/MORTAR Mixer Maintenance MixerMain Gear and Drive Pinion Alignment Gear LubricationEyesight Hazard TiresWear/InflationTires/Wheels/Lug Nuts Lug NutTorque Requirements Wheel Lug NutsTightening SequenceKeep Hands SuspensionMixer Storage WM-70 PLASTER/MORTAR Mixer -TROUBLESHOOTING Engine Engine TroubleshootingWM-70 PLASTER/MORTAR Mixer -TROUBLESHOOTING Engine WhiteWM-70PLASTER/MORTARMIXER-TROUBLESHOOTINGMIXER/ELECTRICMOTOR WM-70 PLASTER/MORTAR Mixer -WIRING Diagram Electric Motor Page Multiquip INC