Multiquip WM-70P (Plastic), WM-70S (Steel) manual WM-70 PLASTER/MORTAR Mixer Maintenance Engine

WM-70 PLASTER/MORTAR MIXER — MAINTENANCE (ENGINE)

Use Table 8 as a general maintenance guideline when servicing your engine.For more detail engine maintenance information, refer to the engine owner's manual supplied with your engine.

TABLE 8. ENGINE MAINTENANCE SCHEDULE

			FIRST		EVERY	EVERY	EVERY	EVERY
DESCRIPTION (3)	OPERATION	BEFORE	MONTH		3 MONTHS	6 MONTHS	YEAR	2 YEARS
			OR		OR	OR	OR	OR
			10 HRS.		25 HRS.	50 HRS.	100 HRS.	200 HRS.
Engine Oil	CHECK	X
	CHANGE		X
Air Cleaner	CHECK	X
	CHANGE				X (1)
All Nuts & Bolts	Re-tighten If	X
	Necessary
Spark Plug	CHECK-CLEAN					X
	REPLACE							X
Cooling Fins	CHECK					X
Spark Arrester	CLEAN						X
Fuel Tank	CLEAN						X
Fuel Filter	CHECK						X
Idle Speed	CHECK-ADJUST						X (2)
Valve Clearance	CHECK-ADJUST							X (2)
Fuel lines	CHECK			Every 2 years (replace if necessary) (2)

(1)Service more frequently when used in DUSTY areas.

(2)These items should be serviced by your service dealer, unless you have the proper tools and are mechanically proficient. Refer to the HONDA Shop Manual for service procedures.

(3)For commercial use, log hours of operation to determine proper maintenance intervals.

PAGE 28 — WM-70 PLASTER/MORTAR MIXER — OPERATION MANUAL — REV. #1 (08/09/04)