Connections |
English |
L |
R |
SPEAKER 6 |
L
R
Using S-Video In jack
●Use the
●To listen to TV channels through this system, use the audio cables (white/red) to connect AUX IN jacks to the corresponding AUDIO OUT jacks on the TV set.
●Deactivate Progressive Scan through SYSTEM MENU. See page 31, Using the Setup Menu- Using Progressive Scan to improve image quality.
IMPORTANT!
–If your TV set only has a single Antenna In jack (or labeled as 75 ohm or RF In), you will need a RF modulator in order to view the DVD playback via TV. See your electronics retailer or contact Philips for details on RF modulator availability and operations.
Using an accessory RF modulator
●Use the composite cable (yellow) to connect the system’s VIDEO jack to the video input jack on the RF modulator.
●Use the RF coaxial cable (not supplied) to connect the RF modulator to your TV’s RF jack.
●Deactivate Progressive Scan through SYSTEM MENU. See page 31, Using the Setup Menu- Using Progressive Scan to improve image quality.
12