Philips FWD39/ 21 Setting the digital output, Setting the PCM output, Test Tone, PCM 96K, PCM 48K

English

DVD Menu Operations

Setting the digital output Night mode - turning on/off

Set Digital Output according to your optional audio equipment connections.

PBC

Off

Select this to deactivate the digital output.

All

Select this if you have connected the digital output to a piece of optional audio equipment that has a multichannel decoder.

PCM only

Select this if the external component is capable of processing digital signal input. After that, proceed to “Setting the PCM output”.

Setting the PCM output

PBC

PBC

NIGHT MODE SET TO OFF

Off

Select this when you want to enjoy the surround sound with its full dynamic range.

On

Select this to level out the volume. High volume output will be softened and low volume output will be brought upward to an audible level.This feature is only available for movies with Dolby Digital mode.

Test Tone

AUTO

PCM 96K

Select this if the optional audio equipment is capable of processing digital signal input with sampling rate of 96 kHz. However, if the sound output is distorted or there is no sound, select ‘48 kHz’.

PCM 48K

Select this if the optional audio equipment is incapable of processing 96 kHz digital signal input, then convert to standard signal with sampling rate of 48 kHz.

Note:

–The PCM OUTPUT can be selected only when PCM ONLY is selected.

The system will start testing the speaker from left speaker to right speaker cyclically until you exit tone test.

Notes:

–You can press 1 to exit test tone mode at any time.

–Main volume can be adjusted during tone test

32