select the desired preset number.
numeric keys (0-9) to
Press O / P or
●
IMPORTANT!
– Make sure FM and MW antennas are connected.
Tuning to radio stations
1 Press TUNER to select “FM XX” or “MW XX”.
2 Press and hold 1 / ¡ on the system or on the remote control until the frequency indication starts to change, then release.
➜ The next radio station will be tuned automatically.
3 To tune a weak station, press 1 / ¡ on the system or on the remote control to search until a radio station with sufficient signal strength is found.
Presetting radio stations
You can store up to 40 preset radio stations in the memory, starting from FM and followed by MW bands.
Automatic preset programming
You can start automatic presetting from a selected preset number.
1 Press TUNER (BAND) to select TUNER mode. ➜ The current radio frequency will appear on the display.
To begin automatic preset from a desired preset number
Tuner Operations
2Press and hold PROGRAM for 3 seconds,
“AUTO SEARCHING” appears on the display.
➜PROG will start to flash.
➜The system will start to search all radio stations on the FM band, then MW band.
➜All radio stations with strong signal strength will be stored automatically.
➜The system will stop searching when all available radio stations are stored or when the memory of 40 preset radio stations is full.
➜The first preset radio station will then be played when completed.
To stop storing the automatic preset
●Press PROGRAM on the remote control or 7 on the system.
Note:
– If no preset number is selected, automatic preset will begin from “01” and all your former presets will be overridden.
English
35