Preparations
English
Notes:
–The clock will be cancelled when the power cord is disconnected or if a power failure occurs.
–During clock setting, if no button is pressed within 10 seconds, the system will exit the setting mode and go back to it’s previous status.
Step 3: Setting the TV set
IMPORTANT!
–Make sure you have completed all the necessary connections. (See Connections
–Connecting TV set)
1 Press DISC (DISC 1•2•3) on the front panel (or press DISC 1/2/3 on the remote control).
2Turn on the TV set and set to the correct Video- In channel.You should see the blue Philips DVD background screen on the TV set.
➜You may go to channel 1 on your TV set, then press the channel down button repeatedly until you see the Video In channel.
➜Or, you can use the TV remote control to select different video modes.
➜Or, set TV to channel 3 or 4 if you are using an RF modulator.
Selecting the color system that matches
your TV set
1In disc mode, stop playback and press SYSTEM MENU.
2Select icon and press 4.
3Press 1 / ¡ / 5 / 4 keys on the remote control to toggle through the functions and select your preferred option.
➜Move to and press ¡.
➜Move to “TV System” and press ¡.
AUTO
–Select this if the connected TV set is compatible with both NTSC and PAL (multi system).The output format will be consistent with the video signal of the disc.
NTSC
–Select this if the connected TV set is NTSC system. It will change the video signal of a PAL video disc and output to NTSC system.
PAL
–Select this if the connected TV set is PAL system. It will change the video signal of an NTSC disc and output to PAL format.
4Select an item and press OK.
To remove the menu Press SYSTEM MENU.
This DVD Mini
1
2,3
4
20