| Connections |
Step 3: Connecting TV set | English |
| |
L |
|
| L |
R |
|
| R |
IMPORTANT!
–You only need to make one video
connection from the following options, according to the capabilities of your TV system.
–
connection provides higher picture quality. These options must be available on your TV set.
–Connect the system directly to the TV set.
Using Video In jack (CVBS)
●Use the composite video cable (yellow) to connect the system’s VIDEO jack to the video input jack (or labeled as A/V In,Video In, Composite or Baseband) on the TV set.
●To listen to TV channels through this system, use the audio cables (white/red) to connect AUX IN (L/R) jacks to the corresponding AUDIO OUT jacks on the TV set.
●Deactivate Progressive Scan through SYSTEM MENU. See page 31, Using the Setup Menu- Using Progressive Scan to improve image quality.
Using component Video In jack (Pr PbY)
●Use the component video cables (red/blue/ green) to connect the system’s Pr Pb Y jacks to the corresponding Component video input jacks (or labeled as Pr/Cr Pb/Cb Y or YUV) on the TV set.
●To listen to TV channels through this system, use the audio cables (white/red) to connect AUX IN jacks to the corresponding AUDIO OUT jacks on the TV set.
●If you are using a Progressive Scan TV set (TV with Progressive Scan or ProScan capability), activate the PROGRESSIVE SCAN function through SYSTEM MENU.
11