U-Line U-CLR2160SOD-00, U-CLR2160SOD-41, U-CLR2160SOD-01, U-CLR2160W-00 Pull Frame Away Push Glass

Page 16

3.Grasp outer edge of stainless frame and firmly press inside edge of glass in while pulling stainless frame in opposite direction.

Pull Frame

Away

Push Glass

In

4.Unhinge frame from door.

Assemble Stainless Frame

1.Prop frame against solid surface, handle side down and away

2.Insert door, logo forward, into frame at a 30° angle. For a right hand hinge the logo should be to your right. For a left hand hinge the logo should be to your left.

Door Orientation Right Hand Hinge

Logo

Door Orientation Left Hand Hinge

Logo

3.Swing door into frame.

4.Install screws removed in “Remove Stainless Frame” step 1 to top of door, opposite handle.

5.Install pivot plat to bottom of door, opposite of handle, using hardware removed in “Remove Stainless Frame” step 2. Arrange pivot plate so the flat edge is against the edge of the door.

Door Edge

Pivot Plate

Flat Edge

Orient Hinge

1. Remove existing top hinge (three screws) (2).

1

2

Reinstall hinge to bottom opposite.

1.Install the hinge just removed from the top to the BOTTOM opposite side of the cabinet (three screws) (2).

2.Remove the two door closer inserts (4) from the preexisting bottom hinge.

4

4

3.Install door closer inserts as shown on the new bottom hinge

(4).

u-line.com

13

Image 16
Contents USE and Care Guide Read and save this Use and Care Guide Please Record Your Model InformationTable of Contents Safety Alert Definitions General PrecautionsModel Features Combo Model FeaturesAdjusting Air Temperature To adjust the set point temperatureAir Flow Initial StartupChecking Product Temperature Clean AlertTo check the actual product temperature in the unit Interior LightingElectronic Control Quick Guide TouchClear Ice Maker Cleaning Cycle Force ice from Evaporator. Damage may ResultIce Cube Thickness Adjustment Refresh KitRefresh Kit Part Number Model Interval As RequiredRemoving and Installing Interior Shelves Light Bulb ReplacementLeveling CLRCO2175 OnlyRemoving and Installing Door Shelves Removing and Installing GrilleInstalling the grille To align and adjust the door Door Alignment and AdjustmentDoor Reversability Reinstall hinge to bottom opposite Reversing Black or White DoorsRemove hole plugs Remove existing top hingeReversing Stainless Steel Glass Doors Pull Frame Away Push Glass Remove existing bottom hinge Interior Cleaning Exterior CleaningDefrosting Condenser Cleaning Storage, Vacation and MovingProduct Disposal Interval Every Three MonthsBefore Calling for Service If Service is RequiredReplacement Parts Troubleshooting GuideDESIGNED, Engineered and Assembled in WISCONSIN, USA