U-Line U-CLR2160W-40 manual Removing and Installing Grille, Removing and Installing Door Shelves

Removing and Installing Grille

!WARNING

Disconnect electric power to the unit before removing the grille.

!WARNING

DO NOT touch the condenser fins (4). The condenser fins are SHARP and can be easily damaged.

Removing the grille.

1.Disconnect power to the unit.

2.Loosen the two screws (1).

3.Remove grille (2) from unit.

Installing the grille:

1.Place the hook-hinge located on the rear bottom side of the grille (2) onto the front lip of the unit base. Swing the grille up into position.

2.Align cabinet and grill holes and secure, but do not overtighten grille screws (1).

3.Reconnect power to the unit.

1

2

4 5

Typical Model Shown

Removing and Installing Door Shelves

1

2

For models equipped with door shelves:

To remove the door shelf:

1.Grasp shelf in center, and lift until the shelf notches (1) clear the pins (2).

2.Carefully pull the shelf away from the door.

To install the door shelf:

1.Holding the shelf in the center, center the shelf in the door at the desired location, slightly above the pins (2).

2.Lower the shelf onto the pins (2).

u-line.com 9