U-Line ADA15IM Product Registration Models Covered, Tools / Material Required, Exterior Cleaning

Page 4

3 Inspect & Plan

Product Registration

You have received a carton containing your ice maker unit with a package inside containing a Use and Care Guide, a Product Registration Card, and a water line kit. Please complete and mail the Product Registration Card or register online at www.U- LineService.com. Once your unit is installed, keep the Use and Care Guide and this Installation Guide in a safe place for future reference.

Models Covered

This installation guide covers the following models

Tools / Material Required

Screwdrivers — slotted and Phillips head

1/4-inch thick door panel material and cutting tools (If installing a 1/4” Panel)

1/4” Nut Driver

5/16” Nut Driver

Side Cutter

Copper tubing cutter

12” Level

9/16” Open end wrench

7/16” Open end wrench

Pliers

Copper tubing

A complete water hook up kit is also available for purchase from your dealer. Order U-Line Part No. WATERHOOKUP.

Exterior Cleaning

U-ADA15IMB-00 U-ADA15IMS-00 U-ADA15IMS-01 U-BI2115B-00 U-BI2115S-00 U-BI2115S-01 U-BI2115SOD-00 U-BI2115SOD-01 U-BI2115W-00 ULN-BI95B-00 ULN-BI95WH-00

ULN-BI98B-00 ULN-BI95WH-00 ULN-SP18B-03 ULN-SP18WH-03 ULN-SS1095FC-03 ULN-SS1095FD-03 ULN-SS1095NF-03 ULN-SS95-03 ULN-SS98-03 ULN-WH95TP-03

Black and White Models:

Black and White surfaces may be cleaned with a mild detergent and warm water solution. Do not use solvent-based or abrasive cleaners. Use a soft sponge and rinse with clean water. Wipe with a soft, clean towel to prevent water spotting.

Stainless Models:

• Stainless door panels, handles and frames can discolor when

exposed to chlorine gas, pool chemicals, salt water or cleaners

with bleach.

• Keep your Stainless unit looking new by cleaning with a good

quality all-in-one stainless steel cleaner/polish on a monthly

basis. For best results use Claire Stainless Steel Polish and

Cleaner, which can be purchased from U-Line Corporation

(Part numbers 173348). Frequent cleaning will remove surface

contamination that could lead to rust. Some installations may

Please carefully follow the directions that apply to your unit and your intended design.

require cleaning on a weekly basis.

• Do not clean with steel wool or abrasive pads.

• Do not use cleaners that are not specifically intended

for stainless steel on stainless surfaces (this includes

glass, tile and counter cleaners).

• If any surface discolors or rust appears, clean it quickly with

Bon-Ami or Barkeepers Friend Cleanser and a non-abrasive

cloth. Always clean in the direction of the grain. Always finish

this process with Claire Stainless Steel Polish and Cleaner or

comparable product to prevent further problems.

WARNING

Rust that is allowed to linger can penetrate into the surface of the stainless steel and complete removal of the rust may not be possible.

U-Line Inspect & Plan

3

Image 4
Contents Install Guide Table of Contents General Precautions Safety Alert DefinitionsSafety Precautions Exterior Cleaning Product Registration Models CoveredTools / Material Required Inspect & PlanUnits can not be installed behind a closed cabinet door Cut-Out DimensionsPrepare Site BI95BTP Product Dimensions ADA15IM SeriesADA15IM Stainless Series BI95B & BI95WH BI98 BI2115SS1095FD SS1095FCSP18 SS1095NFDoor Swing Dimensions Power SupplyWater Supply Environmental RequirementsDoor Reversal BI95 & BI98Reversing the Door WH95TP, BI95BTP, BCM95 & SP18 See Figure1213 1617Underneath the hinge to the opposite hole in top cap SS10952324 Page Panel Dimensions Door Panel Installation 98, SP18, & ADA15Door Panel Installation Door Panel PreparationAdjusting Door Alignment Electrical SpecificationsAdjust Door Power SupplyWater Supply Connection PlumbingInstallation Grille InstallationInstall Leveling InformationInstallation Troubleshooting BI-2115 SpecificInstallation Guide
Related manuals
Manual 2 pages 62.78 Kb Manual 66 pages 37.32 Kb