U-Line 2075RF manual Attaching the Full Overlay Panel

Page 10

2075R Refrigerator and 2075RF Refrigerator/Freezer

 

 

 

5.Remove the top handle and discard. (This handle will be replaced with the Modified Handle included in the Full Overlay Door Panel Kit.)

6.Remove the two screws located on both sides of the lower handle. Remove the handle.

7.Attach the Modified Handle to the lower handle using the three screws removed in Step 4. Set aside.

8.Slide the existing door panel out of the doorframe.

Attaching the Full Overlay Panel

1.Tap nylon inserts into the top holes drilled in the overlay panel. Use two #6 screws to attach top pivot bracket to the overlay panel (see Figure 19).

Typical Wood

Panel

#6 X 5/8"

Flat Head Screw

Two Required

Top Pivot

Plate

8 mm Plug Insert

Two Required

Back of

Tape

Removed

Wood

Door Panel

Panel

 

Side of

 

Wood Panel

Bottom of

 

Wood Panel

5/16"

3/8"

Bottom

Both Sides

Figure 20

 

 

Drill 5/32" x 3/8" Deep

 

for usewith #10 x 5/8"

Wood Screw and Nylon

Spacer – 7 Places

Figure 19

2.Place and tape the existing door panel on the back of the overlay panel (see Figure 20) and drill holes through both panels according to Figure 21. Remove tape adjoining the panels and enlarge the seven holes in the overlay panel using a 0.201" (#7) drill.

3.If a user-supplied cabinet handle will be used, attach its hardware to the overlay panel at this time.

Rear View

of

Wood Panel

1"± 1/32"1"± 1/32" 11-7/8"

27"± 1/4"

14-5/16"±1/4"

1"± 1/8"

Figure 21

4.Attach the door panel to the overlay panel using #10 x 5/8" wood screws and nylon spacers. The nylon spacers fit between the overlay panel and the door panel as shown in Figure 22. The spacers allow the original door panel to slide back into the 1/4"-thick door reveal (channel).

www.U-LineService.com

10

02/2005

Image 10
Contents 2075R Refrigerator 2075RF Refrigerator/Freezer Contents Follow Safety PrecautionsTools/Materials Required General PrecautionsInspect and Plan InspectionPrepare Site Exterior CleaningCut-Out Dimensions Black and White ModelsProduct Dimensions Door Swing/Clearances Information Reversing the DoorOther Site Requirements Power SupplyEnvironmental Requirements Door Panel Installation Side-By-Side Installation InstructionsPrepare and Install Door Panel Custom 1/4 Door Panel InsertFull Overlay Door Panel Installation Instructions Removing Existing DoorAttaching the Full Overlay Panel Installing the Door Assembling the DoorTo 6 Prepare Power Adjusting Door AlignmentAdjust Door Checking Door AlignmentPrepare Power Supply Electrical SpecificationsInstallation Tip Leveling InformationInstall the Unit Installation of the 2075R/2075RFInstallation Troubleshooting Relocating the ShelvesInitial Start-Up Start-Up TroubleshootingStart-Up for the First Time Service Information Who to Call

2075RF, 2075R specifications

The U-Line 2075R and 2075RF are exceptional refrigeration units designed to meet the needs of modern kitchens and entertaining spaces. Known for their sleek design and advanced features, these products stand out in the market for their efficiency and versatility.

One of the primary features of the U-Line 2075R is its impressive capacity. With a total storage space of up to 5.7 cubic feet, it can accommodate a wide range of beverages, including bottles, cans, and more. The model is designed with adjustable shelving, allowing users to customize the interior layout according to their storage needs. This flexibility makes it ideal for home use as well as for commercial settings.

The U-Line 2075RF model enhances the standard features of the 2075R by incorporating a more sophisticated refrigeration technology. It includes a dual-zone cooling system, which enables precise temperature control for both wine and general beverage storage. Each zone can be adjusted independently, making it the perfect choice for connoisseurs who want to preserve their wine at optimal temperatures while also keeping other beverages chilled.

Both models boast a stunning glass door that offers a clear view of the contents without opening the unit, which helps maintain internal temperatures and save energy. The LED lighting inside is strategically placed to provide excellent visibility while being energy-efficient. Users can also choose from multiple interior configurations thanks to the removable shelves, allowing for easy organization based on personal preferences.

U-Line prioritizes energy efficiency, and both the 2075R and 2075RF are Energy Star certified. This means they are designed to consume less energy compared to conventional models, helping users save on utility costs while also being more environmentally friendly. The quiet operation of these units is another significant advantage, as it minimizes noise disruption in any setting.

Lastly, the exterior of both models features a stainless-steel finish, adding a touch of elegance that blends seamlessly with various kitchen styles. The front ventilation allows for built-in or freestanding installation, increasing their adaptability in different spaces.

In summary, the U-Line 2075R and 2075RF are top-of-the-line refrigeration solutions, engineered for optimal performance, energy efficiency, and stylish design, making them perfect for both residential and commercial applications.