U-Line 2075RF manual Full Overlay Door Panel

Page 8

2075R Refrigerator and 2075RF Refrigerator/Freezer

 

 

 

Figure 12

Figure 13

Full Overlay Door Panel

Door Panel Preparation

A full overlay door panel completely covers the doorframe and handle to give a built-in appearance. See your U-Line dealer for the optional Full Overlay Door Panel Kit (P/N U-OL2075B — Black or P/N U-OL2075W — White). Appropriate hardware, Modified Handle, Replacement Hinges and a copy of these instructions will be included in the kit.

1.Cut the overlay to the following dimensions (see Figure 15).

Full Overlay Dimensions:

3.Pull door gasket out of groove (top edge of door only). Start in the middle and pull outward, moving toward the edge (see Figure 13). This may take some force. Do not remove the three screws behind gasket.

4.Remove two outside screws holding door handle. Slightly separate door handle from door (see Figure 14).

5.Pull handle up and off.

6.Remove and discard existing panel and cardboard spacer.

7.Slide custom door panel insert into 1/4-inch channel in door front.

8.Holding door gasket out

of the way, replace handle

Figure 14

on door, making sure it is

 

seated properly on insert

 

and that screw holes

 

line up.

 

9.Install two small screws removed in Step 4.

10.Starting at the corners and working inward, push door gasket into place on door.

11.Place door on bottom hinge pin and install upper hinge screw.

12.Reinstall the door shelves by lining up the bosses and first pushing straight in, then down at a 45° angle (see Figure 34 on Page 14). Go on to 5 Adjust Door.

Width: 23-3/4"

Height: 29-7/8"

The door panel must not weigh more than 20 lbs.

3/4"

 

13/16"

 

1/8"

 

1/8"

 

Relief Notch

 

for Pivot Plate

 

Rear View

29-7/8"

of

Wood Panel

 

23-3/4"

 

Figure 15

 

IMPORTANT

Rear View of wood panel for right-hand hinge shown. Use mirror image for left-hand hinges.

2.Create a relief (Figure 15) for pivot plate by cutting notch in top corner and coinciding back corner of overlay panel. Refer to Figure 16 for exact specifications.

www.U-LineService.com

8

02/2005

Image 8
Contents 2075R Refrigerator 2075RF Refrigerator/Freezer Contents Follow Safety PrecautionsGeneral Precautions Inspect and PlanTools/Materials Required InspectionExterior Cleaning Cut-Out DimensionsPrepare Site Black and White ModelsProduct Dimensions Door Swing/Clearances Information Reversing the DoorEnvironmental Requirements Power SupplyOther Site Requirements Side-By-Side Installation Instructions Prepare and Install Door PanelDoor Panel Installation Custom 1/4 Door Panel InsertFull Overlay Door Panel Installation Instructions Removing Existing DoorAttaching the Full Overlay Panel Installing the Door Assembling the DoorAdjusting Door Alignment Adjust DoorTo 6 Prepare Power Checking Door AlignmentElectrical Specifications Installation TipPrepare Power Supply Leveling InformationInstallation of the 2075R/2075RF Installation TroubleshootingInstall the Unit Relocating the ShelvesStart-Up for the First Time Start-Up TroubleshootingInitial Start-Up Service Information Who to Call

2075RF, 2075R specifications

The U-Line 2075R and 2075RF are exceptional refrigeration units designed to meet the needs of modern kitchens and entertaining spaces. Known for their sleek design and advanced features, these products stand out in the market for their efficiency and versatility.

One of the primary features of the U-Line 2075R is its impressive capacity. With a total storage space of up to 5.7 cubic feet, it can accommodate a wide range of beverages, including bottles, cans, and more. The model is designed with adjustable shelving, allowing users to customize the interior layout according to their storage needs. This flexibility makes it ideal for home use as well as for commercial settings.

The U-Line 2075RF model enhances the standard features of the 2075R by incorporating a more sophisticated refrigeration technology. It includes a dual-zone cooling system, which enables precise temperature control for both wine and general beverage storage. Each zone can be adjusted independently, making it the perfect choice for connoisseurs who want to preserve their wine at optimal temperatures while also keeping other beverages chilled.

Both models boast a stunning glass door that offers a clear view of the contents without opening the unit, which helps maintain internal temperatures and save energy. The LED lighting inside is strategically placed to provide excellent visibility while being energy-efficient. Users can also choose from multiple interior configurations thanks to the removable shelves, allowing for easy organization based on personal preferences.

U-Line prioritizes energy efficiency, and both the 2075R and 2075RF are Energy Star certified. This means they are designed to consume less energy compared to conventional models, helping users save on utility costs while also being more environmentally friendly. The quiet operation of these units is another significant advantage, as it minimizes noise disruption in any setting.

Lastly, the exterior of both models features a stainless-steel finish, adding a touch of elegance that blends seamlessly with various kitchen styles. The front ventilation allows for built-in or freestanding installation, increasing their adaptability in different spaces.

In summary, the U-Line 2075R and 2075RF are top-of-the-line refrigeration solutions, engineered for optimal performance, energy efficiency, and stylish design, making them perfect for both residential and commercial applications.