U-Line 2075RF manual Initial Start-Up, Start-Up Troubleshooting, Start-Up for the First Time

Page 15

2075R Refrigerator and 2075RF Refrigerator/Freezer

 

9 Start-Up for the First Time

Initial Start-Up

The unit is shipped with the control preset. No adjustments should be necessary at this time. For information about Adjusting the Temperature Control, see the User Manual.

CAUTION

Do not place cans or bottles so they are touching the back wall of the refrigerator section, as they may freeze.

Do not place any objects over air inlet or outlet in the freezer section.

Start-Up Troubleshooting

Q: Problem

Unit does not appear to turn on when switch is set to ON.

A: Solution

Make sure unit is plugged in and outlet has power (circuit breaker has not tripped). Check to see that light switch actuator bracket is contacting the light switch properly.

IMPORTANT

See the User Manual’s Troubleshooting Guide for more solutions.

02/2005

15

www.U-LineService.com

Image 15 Contents
2075R Refrigerator 2075RF Refrigerator/Freezer Follow Safety Precautions ContentsInspection General PrecautionsInspect and Plan Tools/Materials RequiredBlack and White Models Exterior CleaningCut-Out Dimensions Prepare SiteDoor Swing/Clearances Information Reversing the Door Product DimensionsPower Supply Other Site RequirementsEnvironmental Requirements Custom 1/4 Door Panel Insert Side-By-Side Installation InstructionsPrepare and Install Door Panel Door Panel InstallationFull Overlay Door Panel Removing Existing Door Installation InstructionsAttaching the Full Overlay Panel Assembling the Door Installing the DoorChecking Door Alignment Adjusting Door AlignmentAdjust Door To 6 Prepare PowerLeveling Information Electrical SpecificationsInstallation Tip Prepare Power SupplyRelocating the Shelves Installation of the 2075R/2075RFInstallation Troubleshooting Install the UnitStart-Up Troubleshooting Initial Start-UpStart-Up for the First Time Who to Call Service Information