U-Line Installation of the 2075R/2075RF, Relocating the Shelves, Installation Troubleshooting

Page 14

2075R Refrigerator and 2075RF Refrigerator/Freezer

 

 

 

8 Install the Unit

Installation of the 2075R/2075RF

1.Plug in the power cord.

2.Gently push the unit into position. Be careful not to entangle the electrical cord.

3.Re-check the leveling, from front to back and side to side. Make any necessary adjustments. The unit’s top surface should be approximately 1/8" below the countertop.

4.Remove the tape from the glass shelves and wipe out the inside of the unit with a clean, water-dampened cloth.

Door Shelves

1.First pull shelf up at a 45° angle, then straight out (see Figure 34).

2.Choose new location and line up on bosses. First push straight in, then down at a 45° angle.

Notch

Boss

Figure 34

Relocating the Shelves

Both the glass shelves in the refrigerator and the inner door shelves can be moved to accommodate your bottles, cans and containers.

Glass Shelves on 2075R and Right-Hand Hinge 2075RF

1.Open door fully, grasp shelf firmly, lift front edge slightly, and pull straight out.

2.Choose new location and slide shelf onto the appropriate rib.

Glass Shelves on Left-Hand Hinge 2075RF

Installation Troubleshooting

Q: Problem

The door remains open unless it is pushed closed.

A: Solution

The hinges should be self-closing when the door is open approximately 8". If this is not the case, make sure the closers (at the bottom of the hinge pin) are clean, greased and installed correctly. Also, re-check leveling from front to back of the unit and readjust if necessary. Make sure that pivot plate is installed correctly.

1.See Figure 33. Pull shelf out about 6” to clear the wall’s molded protrusion.

2.Tilt right-hand edge of shelf up.

3.Keeping at this angle and hugging the right wall, pull the shelf out.

4.Choose new location and insert over ribs, tilting right-hand edge up. Push in, then lower shelf onto ribs.

1. Pull Out 6"

3. Pull

2. Tilt

Figure 33

Q: Problem

The custom overlay door was designed to align with the rest of the cabinet doors, but the unit has crept forward.

A: Solution

Make sure that the electrical cord is not obstructing the installation.

www.U-LineService.com

14

02/2005

Image 14
Contents 2075R Refrigerator 2075RF Refrigerator/Freezer Contents Follow Safety PrecautionsTools/Materials Required General PrecautionsInspect and Plan InspectionPrepare Site Exterior CleaningCut-Out Dimensions Black and White ModelsProduct Dimensions Door Swing/Clearances Information Reversing the DoorEnvironmental Requirements Power SupplyOther Site Requirements Door Panel Installation Side-By-Side Installation InstructionsPrepare and Install Door Panel Custom 1/4 Door Panel InsertFull Overlay Door Panel Installation Instructions Removing Existing DoorAttaching the Full Overlay Panel Installing the Door Assembling the DoorTo 6 Prepare Power Adjusting Door AlignmentAdjust Door Checking Door AlignmentPrepare Power Supply Electrical SpecificationsInstallation Tip Leveling InformationInstall the Unit Installation of the 2075R/2075RFInstallation Troubleshooting Relocating the ShelvesStart-Up for the First Time Start-Up TroubleshootingInitial Start-Up Service Information Who to Call

2075RF, 2075R specifications

The U-Line 2075R and 2075RF are exceptional refrigeration units designed to meet the needs of modern kitchens and entertaining spaces. Known for their sleek design and advanced features, these products stand out in the market for their efficiency and versatility.

One of the primary features of the U-Line 2075R is its impressive capacity. With a total storage space of up to 5.7 cubic feet, it can accommodate a wide range of beverages, including bottles, cans, and more. The model is designed with adjustable shelving, allowing users to customize the interior layout according to their storage needs. This flexibility makes it ideal for home use as well as for commercial settings.

The U-Line 2075RF model enhances the standard features of the 2075R by incorporating a more sophisticated refrigeration technology. It includes a dual-zone cooling system, which enables precise temperature control for both wine and general beverage storage. Each zone can be adjusted independently, making it the perfect choice for connoisseurs who want to preserve their wine at optimal temperatures while also keeping other beverages chilled.

Both models boast a stunning glass door that offers a clear view of the contents without opening the unit, which helps maintain internal temperatures and save energy. The LED lighting inside is strategically placed to provide excellent visibility while being energy-efficient. Users can also choose from multiple interior configurations thanks to the removable shelves, allowing for easy organization based on personal preferences.

U-Line prioritizes energy efficiency, and both the 2075R and 2075RF are Energy Star certified. This means they are designed to consume less energy compared to conventional models, helping users save on utility costs while also being more environmentally friendly. The quiet operation of these units is another significant advantage, as it minimizes noise disruption in any setting.

Lastly, the exterior of both models features a stainless-steel finish, adding a touch of elegance that blends seamlessly with various kitchen styles. The front ventilation allows for built-in or freestanding installation, increasing their adaptability in different spaces.

In summary, the U-Line 2075R and 2075RF are top-of-the-line refrigeration solutions, engineered for optimal performance, energy efficiency, and stylish design, making them perfect for both residential and commercial applications.