U-Line 2075RF manual Other Site Requirements, Power Supply, Environmental Requirements

Page 6

2075R Refrigerator and 2075RF Refrigerator/Freezer

 

 

 

4.Remove the two door closer inserts from the existing bottom hinge and install as shown on the new bottom hinge (see Figure 8).

8.Holding door upright with top of door tilted forward, place hole of door pivot plate on bottom hinge screw pin (see Figure 10).

Hinge

Screw

Pin

Figure 7

Door

Closer

Inserts

Figure 8

9.Tilt top of door into position in top hinge and install top hinge screw pin.

10.Install plastic screw plugs removed in Step 2 in old hinge holes (3 each, top and bottom).

Figure 10

5.Remove existing bottom hinge (3 screws) and remount on opposite side TOP. Remove hinge screw pin.

6.Remove the plastic hole plug from the top of the door to allow the pivot pin to be inserted in the new location. Install the plug into the vacated hole on the opposite side.

7.With bottom of door facing up, remove pivot plate (2 screws), flip over, and remount on opposite side of door (see Figure 9). Be sure notch in plate faces center.

Figure 9

Other Site Requirements

Power Supply

The unit requires a grounded and polarized 115 VAC, 60 Hz, 15A circuit (normal household current). See Electrical Specifications on Page 13.

Environmental Requirements

The surrounding air temperature must be at least 50°F (10°C) but must not exceed 110°F (40°C). Black and White units may be installed outdoors in a covered area. Stainless Steel 2075R and 2075RF units are deemed suitable for outdoor use by UL. The unit must not be located near heat-generating equipment or in direct sunlight.

www.U-LineService.com

6

02/2005

Image 6
Contents 2075R Refrigerator 2075RF Refrigerator/Freezer Contents Follow Safety PrecautionsTools/Materials Required General PrecautionsInspect and Plan InspectionPrepare Site Exterior CleaningCut-Out Dimensions Black and White ModelsProduct Dimensions Door Swing/Clearances Information Reversing the DoorPower Supply Other Site RequirementsEnvironmental Requirements Door Panel Installation Side-By-Side Installation InstructionsPrepare and Install Door Panel Custom 1/4 Door Panel InsertFull Overlay Door Panel Installation Instructions Removing Existing DoorAttaching the Full Overlay Panel Installing the Door Assembling the DoorTo 6 Prepare Power Adjusting Door AlignmentAdjust Door Checking Door AlignmentPrepare Power Supply Electrical SpecificationsInstallation Tip Leveling InformationInstall the Unit Installation of the 2075R/2075RFInstallation Troubleshooting Relocating the ShelvesStart-Up Troubleshooting Initial Start-UpStart-Up for the First Time Service Information Who to Call

2075RF, 2075R specifications

The U-Line 2075R and 2075RF are exceptional refrigeration units designed to meet the needs of modern kitchens and entertaining spaces. Known for their sleek design and advanced features, these products stand out in the market for their efficiency and versatility.

One of the primary features of the U-Line 2075R is its impressive capacity. With a total storage space of up to 5.7 cubic feet, it can accommodate a wide range of beverages, including bottles, cans, and more. The model is designed with adjustable shelving, allowing users to customize the interior layout according to their storage needs. This flexibility makes it ideal for home use as well as for commercial settings.

The U-Line 2075RF model enhances the standard features of the 2075R by incorporating a more sophisticated refrigeration technology. It includes a dual-zone cooling system, which enables precise temperature control for both wine and general beverage storage. Each zone can be adjusted independently, making it the perfect choice for connoisseurs who want to preserve their wine at optimal temperatures while also keeping other beverages chilled.

Both models boast a stunning glass door that offers a clear view of the contents without opening the unit, which helps maintain internal temperatures and save energy. The LED lighting inside is strategically placed to provide excellent visibility while being energy-efficient. Users can also choose from multiple interior configurations thanks to the removable shelves, allowing for easy organization based on personal preferences.

U-Line prioritizes energy efficiency, and both the 2075R and 2075RF are Energy Star certified. This means they are designed to consume less energy compared to conventional models, helping users save on utility costs while also being more environmentally friendly. The quiet operation of these units is another significant advantage, as it minimizes noise disruption in any setting.

Lastly, the exterior of both models features a stainless-steel finish, adding a touch of elegance that blends seamlessly with various kitchen styles. The front ventilation allows for built-in or freestanding installation, increasing their adaptability in different spaces.

In summary, the U-Line 2075R and 2075RF are top-of-the-line refrigeration solutions, engineered for optimal performance, energy efficiency, and stylish design, making them perfect for both residential and commercial applications.