Maintenance Schedule

Maintenance Service	Monthly	Semi-annually	Seasonal Startup or Annually

Inspect General Condition and Operation	x		x

Observe Operation of:

Mechanical–motor, fan and drive mechanism	x		x

Makeup valve (if equipped)	x		x

Inspect for unusual noise or vibration	x		x

Inspect and Clean:

Air inlet	x		x

PVC drift eliminators	x		x

Distribution basin, nozzles and collection basin	x		x

Fan and pump motor exterior	x		x

Coil surface		x

Check:

Collection water basin level	x		x

Blowdown–adjust as required	x		x

Geareducer Drive (if equipped):

Check for loose fasteners including oil drain plug			x

Check oil level, check for / repair oil leaks	x		x

Change oil		R

Make sure vent is open		x	x

Check driveshaft or coupling alignment			x

Check for loose driveshaft or coupling fasteners			x

Check driveshaft or coupling bushings or flex element for unusual wear		x	x

Lube lines (if equipped):

Check for oil leaks in hoses or fittings	x	R	x

Belt drive (if equipped):

Fan shaft bearing lubrication (every 3 mo.)		every 3 months	every 3 months

Check and tighten support fasteners			x

Check shaft, sheave and belt alignment			x

Check belt tension and condition		x	x

Check sheave bushing fastener torque			x

Fan:

Check and tighten blade and hub fasteners			x

Check fan blade pitch and tip clearance			x

Check fan cylinder for loose fasteners			x

Motor:

Lubricate (grease as required)			R

Check mounting bolts for tightness			x

Operate at least	3 hours a month	3 hours a month	3 hours a month

Basin Heater (if equipped):

Check for proper operation of temp/low water level sensor			x

Inspect/clean buildup of contaminant from sensor		x	x

Structure:

Inspect/tighten all fasteners		x	x

Inspect and touch up all metal surfaces			x

R — Refer to Component User Manual

Note: It is recommended at least weekly, that the general operation and condition be observed. Pay attention to any changes in sound or vibration that may signify a need for closer inspection.

05-116E specifications

SPX Cooling Technologies 05-116E is a state-of-the-art cooling tower aimed at providing exceptional cooling efficiency for industrial and commercial applications. Known for its robust design and advanced features, the 05-116E model promises to deliver reliable performance under various operational conditions.

One of the most notable features of the 05-116E is its energy-efficient operation. The design incorporates advanced thermal performance technologies that allow this cooling tower to maximize heat exchange while minimizing energy consumption. This efficiency not only translates into cost savings for users but also reduces the environmental impact, making it a sustainable choice in today’s eco-conscious market.

The 05-116E utilizes a fiberglass-reinforced plastic construction, which contributes to its durability and resistance to corrosion. This is particularly advantageous for installations in harsh environments, where exposure to elements like chlorine or salt can significantly degrade the performance of traditional materials. The lightweight build facilitates easier installation and maintenance, further enhancing the operational effectiveness of the cooling tower.

Another key characteristic of the SPX Cooling Technologies 05-116E is its modular design. This feature allows for scalable configurations, enabling users to customize their cooling solution according to specific capacity requirements. Whether for a small facility or a large industrial operation, the modularity ensures that optimal cooling performance is maintained at all scales.

The cooling tower is also equipped with innovative fan technology that promotes quieter operation while simultaneously increasing airflow efficiency. This is particularly beneficial in urban or residential areas where noise reduction is a priority. Coupled with effective vibration dampening mechanisms, the 05-116E ensures a peaceful operating environment.

Moreover, the 05-116E model incorporates advanced water management systems, designed to minimize water usage and enhance water treatment practices. This not only conserves valuable resources but also ensures that the cooling processes remain hygienic and efficient throughout the operational lifespan.

In summary, the SPX Cooling Technologies 05-116E stands as a top-tier choice for those seeking a reliable, efficient, and durable cooling tower solution. With its energy-saving features, robust construction, modular capability, quiet operation, and advanced water management systems, it fulfills the demanding requirements of modern cooling applications across various industries.