SPX Cooling Technologies 05-116E user manual Fluid Cooler Location

Page 5

 

Preparation

 

Itisnot intended nor assumed that access tothe fan deck onsingle-flow

Note

models—Models MHF702 thru MHF705—is needed or necessary.

 

 

Those are only some of the safety issues that may arise in the design

 

process. SPX strongly recommends that you consult a safety engineer

 

to be sure that all safety considerations have been addressed.

 

Several options are available that may assist you in addressing some of

 

these personnel safety concerns, including:

 

•

Louver face distribution basin access platform with ladder and handrail.

 

•

Louver face redistribution basin level access platform with ladder and

 

 

handrail.

 

• A handrail system around the perimeter of the fan deck with either one

 

 

or two ladders for access to the deck. Double-flow models MHF706

 

 

and MHF707 only.

 

•

Extended fan deck that provides additonal access around one end

 

 

of the fan cylinder opposite the fan deck access ladder. Double-flow

 

 

models MHF706 and MHF707 only.

 

•

Ladder extensions—used where the base of the tower is elevated.

 

•

Safety cages for ladders.

 

•

External lube lines.

 

•

Access door platform.

 

•

Motor located outside the tower. Double-flow models MHF706 and

 

 

MHF707 with Geareducer drive only.

 

•

External motor access platform. Double-flow models MHF706 and

 

 

MHF707 with Geareducer drive only.

 

•

Plenum walkway. Double-flow models MHF706 and MHF707 only.

 

 

Standard on all other models.

 

•

Mechanical equipment access platform.

Fluid Cooler Location

Space available around the fluid cooler should be as generous as possible to promote ease of maintenance—and to permit freedom of airflow into and through the fluid cooler. If you have questions about the adequacy of the available space and the intended configuration of the fluid cooler, please contact your Marley sales representative for guidance.

Prepare a stable, level support foundation for the fluid cooler, utilizing weight, wind load, and dimensional information appearing on appropri- ate Marley submittal drawings. Supports must be level to insure proper

operation of the fluid cooler.

➠

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Marley MH Fluid Cooler Page Contents Preparation Safety FirstFluid Cooler Location Fluid Cooler Shipment InstallationReceiving Fluid Cooler Hoisting Fluid CoolerFluid Cooler Installation When using a starter Motor WiringWhen using a VFD When using a two-speedstarterInstallation Mechanical Equipment Installation Water System OperationFluid Cooler Start-Up Operation General Fluid Cooler OperationFan acceleration time of 30 seconds per hour Wintertime OperationOperation Protection Against Coil Freezing Intermittent Wintertime OperationModel Coil Volume Maintaining Water Quality Water Treatment and BlowdownBlowdown MaintenanceFluid Cooler Cleaning Belt Tensioning Jacking Screws Sheave Alignment FAN Shaft SheaveBushing Fastener Torque Values Fluid Cooler MaintenanceMaintenance Motor Relubrication Instructions Seasonal Shutdown Instructions Prolonged Shutdown SPX Cooling Technologies Services Maintenance Schedule Trouble Cause Remedy TroubleshootingTroubleshooting Additional Information Page Manual 05-116E

05-116E specifications

SPX Cooling Technologies 05-116E is a state-of-the-art cooling tower aimed at providing exceptional cooling efficiency for industrial and commercial applications. Known for its robust design and advanced features, the 05-116E model promises to deliver reliable performance under various operational conditions.

One of the most notable features of the 05-116E is its energy-efficient operation. The design incorporates advanced thermal performance technologies that allow this cooling tower to maximize heat exchange while minimizing energy consumption. This efficiency not only translates into cost savings for users but also reduces the environmental impact, making it a sustainable choice in today’s eco-conscious market.

The 05-116E utilizes a fiberglass-reinforced plastic construction, which contributes to its durability and resistance to corrosion. This is particularly advantageous for installations in harsh environments, where exposure to elements like chlorine or salt can significantly degrade the performance of traditional materials. The lightweight build facilitates easier installation and maintenance, further enhancing the operational effectiveness of the cooling tower.

Another key characteristic of the SPX Cooling Technologies 05-116E is its modular design. This feature allows for scalable configurations, enabling users to customize their cooling solution according to specific capacity requirements. Whether for a small facility or a large industrial operation, the modularity ensures that optimal cooling performance is maintained at all scales.

The cooling tower is also equipped with innovative fan technology that promotes quieter operation while simultaneously increasing airflow efficiency. This is particularly beneficial in urban or residential areas where noise reduction is a priority. Coupled with effective vibration dampening mechanisms, the 05-116E ensures a peaceful operating environment.

Moreover, the 05-116E model incorporates advanced water management systems, designed to minimize water usage and enhance water treatment practices. This not only conserves valuable resources but also ensures that the cooling processes remain hygienic and efficient throughout the operational lifespan.

In summary, the SPX Cooling Technologies 05-116E stands as a top-tier choice for those seeking a reliable, efficient, and durable cooling tower solution. With its energy-saving features, robust construction, modular capability, quiet operation, and advanced water management systems, it fulfills the demanding requirements of modern cooling applications across various industries.
Top Page Image Contents