Smeg GKC64-3, GKC95-3 manual Fixing 90 cm hobs on 60 cm base unit

Page 5

Instructions for the installer

Bracket ‘A’ in the 1st slot

Bracket ‘A’ in the 2nd slot

Bracket ‘B’

2.2Fixing 90 cm hobs on 60 cm base unit

If a 90 cm hob is to be bracketed to a 60 cm base unit, 2 central brackets “A” have to be used in addition to the side brackets “B” as shown in the drawing below. The gas connection also has to be turned through 90° in relation to the original position(see paragraph 4 GAS CONNECTION).

Image 5

Contents Contents Instructions for Safe and Proper USE IntroductionIntroduction Attachment to support structure Instructions for the installerPositioning of the HOB Fixing 90 cm hobs on 60 cm base unit Electrical Connection GAS Connection Discharge of combustion products Connection to LPGVentilation of rooms Regulation for LPG Adaptation to Different Types of GASRemoving the hob models with integrated control panel Auxiliary 400 Semi-rapid Regulation for G25/25 mbar Cm hobs with separable control panel Burner G25 G30/G31 Regulation of primary airCm hobs with separable control panel Burner G25 G30/G31Regulation of minimum for LPG Final OperationsRegulation of minimum for natural gas 90 cm. hob 60 cm. hobLubrication of gas taps Practical advice for using the burners Using the HOBInstructions for the user Ignition of the burnersDiameter of the pans Using the electric elementsBurners Min. and max. en cm Turning on electric elementsTo use correctly remember to Using a griddle plateCleaning Cleaning and MaintenanceRegular daily cleaning of the hob Food stains or residuesIgnition plugs and safety devices Cleaning of cooking hob componentsElectric element Cover