Smeg GKCO64-3, GKDCO15 manual Adaptation To Different Types Of Gas, Instructions for the installer

Contents Contents 1. INSTRUCTIONS FOR SAFE AND PROPER USE IntroductionNEVER UNPLUG BY PULLING ON THE CABLE NEVER ATTEMPT TO REPAIR THE APPLIANCETHE PLATE ON THE CASING MUST NOT BE REMOVED IntroductionInstructions for the installer 2. POSITIONING OF HOB2.1.1 Attachment to support structure Instructions for the installer 3. ELECTRICAL CONNECTION Instructions for the installerplate for any reason Instructions for the installer 4. GAS CONNECTION4.1 Connection to LPG Instructions for the installer4.2 Ventilation of rooms 4.3 Discharge of combustion products5. ADAPTATION TO DIFFERENT TYPES OF GAS Instructions for the installer5.1 Removing the hob 5.2 Regulation for LPG Instructions for the installerRated BurnerheatingLPG - G30/G31 28/37 mbar capacity kWInstructions for the installer 5.3 Regulation for G25/25 mbar5.4Regulation of primary air Instructions for the installer 6. FINAL OPERATIONS6.1Regulation of minimum for natural gas 6.2 Regulation of minimum for LPG6.3 Arrangement of burners on hob Instructions for the installer6.4 Lubrication of gas taps This must be done by a qualified technicianInstructions for the user 7. USING THE HOB7.4 Using a griddle plate 7.2 Practical advice for using the burnersInstructions for the user 7.3 Diameter of containersInstructions for the user 7.5.2 Using the electric elements8.1 Cleaning 8. CLEANING AND MAINTENANCE8.1.1 Regular daily cleaning of the hob Instructions for the user8.2.1 Ignition plugs and safety devices 8.2 Cleaning of cooking hob componentsInstructions for the user 8.2.2 The electric element