Smeg GKDCO15, GKCO64-3 manual Introduction, Instructions For Safe And Proper Use

Page 2
Introduction

Introduction

1. INSTRUCTIONS FOR SAFE AND PROPER USE

THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE AND THEREFORE MUST BE KEPT IN ITS ENTIRETY AND IN AN ACCESSIBLE PLACE FOR THE WHOLE WORKING LIFE OF THE COOKING HOB. WE ADVISE READING THIS MANUAL AND ALL THE INSTRUCTIONS THEREIN BEFORE USING THE COOKING HOB. ALSO KEEP THE SERIES OF NOZZLES SUPPLIED. INSTALLATION MUST BE CARRIED OUT BY QUALIFIED PERSONNEL IN ACCORDANCE WITH THE REGULATIONS IN FORCE. THIS APPLIANCE IS INTENDED FOR DOMESTIC USES AND CONFORMS TO CURRENT REGULATIONS IN FORCE. THE APPLIANCE HAS BEEN BUILT TO CARRY OUT THE FOLLOWING FUNCTIONS: COOKING AND HEATING-UP OF FOOD. ALL OTHER USES ARE CONSIDERED IMPROPER.

THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR IMPROPER USE.

DO NOT LEAVE THE PACKING IN THE HOME ENVIRONMENT. SEPARATE THE VARIOUS WASTE MATERIALS AND TAKE THEM TO THE NEAREST SPECIAL GARBAGE COLLECTION CENTRE.

IT IS OBLIGATORY FOR THE ELECTRICAL SYSTEM TO BE GROUNDED ACCORDING TO THE METHODS REQUIRED BY SAFETY RULES.

THE PLUG TO BE CONNECTED TO THE POWER CABLE AND THE SOCKET MUST BE THE SAME TYPE AND MUST CONFORM TO CURRENT REGULATIONS.

THE SOCKET MUST BE ACCESSIBLE AFTER THE APPLIANCE HAS BEEN BUILT IN.

NEVER UNPLUG BY PULLING ON THE CABLE.

IMMEDIATELY AFTER INSTALLATION CARRY OUT A BRIEF INSPECTION TEST OF THE COOKING HOB, FOLLOWING THE INSTRUCTIONS BELOW. SHOULD THE APPLIANCE NOT FUNCTION, DISCONNECT IT FROM THE SUPPLY AND CALL THE NEAREST TECHNICAL ASSISTANCE CENTRE.

NEVER ATTEMPT TO REPAIR THE APPLIANCE.

ALWAYS CHECK THAT THE CONTROL KNOBS ARE IN THE POSITION "ZERO" (OFF) WHEN YOU FINISH USING THE HOB.

22

Image 2
Contents Contents NEVER UNPLUG BY PULLING ON THE CABLE Introduction1. INSTRUCTIONS FOR SAFE AND PROPER USE NEVER ATTEMPT TO REPAIR THE APPLIANCEIntroduction THE PLATE ON THE CASING MUST NOT BE REMOVED2.1.1 Attachment to support structure Instructions for the installer2. POSITIONING OF HOB Instructions for the installer plate for any reason 3. ELECTRICAL CONNECTIONInstructions for the installer 4. GAS CONNECTION Instructions for the installer4.2 Ventilation of rooms Instructions for the installer4.1 Connection to LPG 4.3 Discharge of combustion products5.1 Removing the hob 5. ADAPTATION TO DIFFERENT TYPES OF GASInstructions for the installer Rated Instructions for the installer5.2 Regulation for LPG BurnerheatingLPG - G30/G31 28/37 mbar capacity kW5.4Regulation of primary air Instructions for the installer5.3 Regulation for G25/25 mbar 6.1Regulation of minimum for natural gas 6. FINAL OPERATIONSInstructions for the installer 6.2 Regulation of minimum for LPG6.4 Lubrication of gas taps Instructions for the installer6.3 Arrangement of burners on hob This must be done by a qualified technician7. USING THE HOB Instructions for the userInstructions for the user 7.2 Practical advice for using the burners7.4 Using a griddle plate 7.3 Diameter of containers7.5.2 Using the electric elements Instructions for the user8.1.1 Regular daily cleaning of the hob 8. CLEANING AND MAINTENANCE8.1 Cleaning Instructions for the userInstructions for the user 8.2 Cleaning of cooking hob components8.2.1 Ignition plugs and safety devices 8.2.2 The electric element