Smeg SE97CXG5, SE97GXBE5 manual Instructions for the installer

Page 5

Instructions for the installer

In case of installation on a hollow compartment with doors, a separating panel has to be placed under the hob. Keep a minimum distance of 10

mmbetween the bottom of the unit and the panel surface. The panel has to be easily removable to allow access in the event of technical service.

Image 5

Contents 7. USING THE HOB 8. LEANING AND MAINTENANCE Contents1. INSTRUCTIONS FOR SAFE AND PROPER USE 2. POSITIONING OF HOB 3. ELECTRICAL CONNECTION 4. GAS CONNECTION1. INSTRUCTIONS FOR SAFE AND PROPER USE IntroductionTHE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR IMPROPER USE NEVER UNPLUG BY PULLING ON THE CABLETHE PLATE ON THE CASING MUST NOT BE REMOVED 2.1.1 Attachment to support structure Instructions for the installer2. POSITIONING OF HOB Instructions for the installer 3. ELECTRICAL CONNECTION 4. GAS CONNECTION 4.3 Discharge of combustion products 4.1 Connection to LPG4.2 Ventilation of rooms 5.1 Removing the hob 5. ADAPTATION TO DIFFERENT TYPES OF GASRated 5.2 Regulation for LPGBurner heating5.4 Regulation of primary air 5.3 Regulation for natural gas6.2 Regulation of minimum for LPG 6. FINAL OPERATIONS6.1 Regulation of minimum for natural gas 6.4 Lubrication of gas taps 6.3 Arrangement of burners on hobBURNERS Auxiliary7.1 Ignition of the burners 7. USING THE HOBInstructions for the user 7.3 Diameter of containers 7.2 Practical advice for using the burners7.4 Using a griddle plate 8.1 Cleaning 8. LEANING AND MAINTENANCENever use a steam jet to clean the appliance Before any intervention, disconnect the power supply of the device8.2.1 Ignition plugs and safety devices 8.2 Cleaning of cooking hob components8.2.2 The electric element 8.2.3 The cover