Smeg SE97GXBE5 Arrangement of burners on hob, Lubrication of gas taps, Burners, Auxiliary, Rapid

Page 13

6.3 Arrangement of burners on hob

Instructions for the installer

6.3 Arrangement of burners on hob

BURNERS

1	Auxiliary
2	Semi-rapid
3	Rapid
4	Double crow

6.4 Lubrication of gas taps

After a while, the gas tap may become hard to turn or lock. If this happens, it has to be cleaned inside and re-greased.

This must be done by a qualified technician.

32

Image 13

Contents 7. USING THE HOB 8. LEANING AND MAINTENANCE Contents1. INSTRUCTIONS FOR SAFE AND PROPER USE 2. POSITIONING OF HOB 3. ELECTRICAL CONNECTION 4. GAS CONNECTION1. INSTRUCTIONS FOR SAFE AND PROPER USE IntroductionTHE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR IMPROPER USE NEVER UNPLUG BY PULLING ON THE CABLETHE PLATE ON THE CASING MUST NOT BE REMOVED 2. POSITIONING OF HOB Instructions for the installer2.1.1 Attachment to support structure Instructions for the installer 3. ELECTRICAL CONNECTION 4. GAS CONNECTION 4.2 Ventilation of rooms 4.1 Connection to LPG4.3 Discharge of combustion products 5.1 Removing the hob 5. ADAPTATION TO DIFFERENT TYPES OF GASRated 5.2 Regulation for LPGBurner heating5.4 Regulation of primary air 5.3 Regulation for natural gas6.1 Regulation of minimum for natural gas 6. FINAL OPERATIONS6.2 Regulation of minimum for LPG 6.4 Lubrication of gas taps 6.3 Arrangement of burners on hobBURNERS AuxiliaryInstructions for the user 7. USING THE HOB7.1 Ignition of the burners 7.4 Using a griddle plate 7.2 Practical advice for using the burners7.3 Diameter of containers 8.1 Cleaning 8. LEANING AND MAINTENANCENever use a steam jet to clean the appliance Before any intervention, disconnect the power supply of the device8.2.1 Ignition plugs and safety devices 8.2 Cleaning of cooking hob components8.2.2 The electric element 8.2.3 The cover