Smeg SE640ID1 manual Residual heat indicator, Cooking zones, Control panel

Page 11

Instructions for the User

6.9 Residual heat indicator

The hob is equipped with a residual heat indicator in the form of the symbol.

When is displayed after the heat has been switched off, it indicates that the residual heat can be used to keep food hot or melt certain foods.

The cooking zone may still be hot even after the symbol is no longer displayed. Danger of burns! The glass ceramic surface does not heat up directly but is heated only indirectly by the bases of the saucepans.

6.10 Cooking zones

The appliance has 4 cooking zones of various power levels and diameters. Their position is clearly indicated with circles and the heat is limited to within the diameters traced on the glass.

The 4 cooking zones are of the HIGH-LIGHT type; they turn on after a few seconds and their heat level can be adjusted by means of the controls on the front panel from 1 (min.) to 9 (max.).

FRONT LEFT HOTPLATE

REAR RIGHT HOTPLATE

REAR LEFT HOTPLATE

FRONT RIGHT HOTPLATE

6.11 Control panel

All the appliance's control and monitoring devices are placed together on the front panel. The symbols used are described in the table below.

REAR LEFT COOKING ZONE / INCREASE VALUE

FRONT LEFT COOKING ZONE / INCREASE VALUE

REAR RIGHT COOKING ZONE / INCREASE VALUE

FRONT RIGHT COOKING ZONE / INCREASE VALUE

DECREASE VALUE BUTTON

TIMER BUTTON

LOCK SENSORS BUTTON

HOB ON / OFF BUTTON

STOP BUTTON

 

37

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Contents Plate Must not be Removed Instructions for USEInformation for Users Recycling Instructions OUR Environment PolicyAuthorised Technician or AT AN Authorised Service Centre Safety InstructionsPlease note Safety instructions Intended USE of the Appliance Before First USEAdvantages of an induction hob HobSaucepan recognition Saucepans suitable for use in induction cooking Limitation on the duration of useOther functions Protection from overheating inductionPower Advice on energy-savingPower levels Power level Suitable forControl panel Residual heat indicatorCooking zones Using the Sensors Zone Number Zone Diameter Using the HOBOperating power settings MAX Absorbed PowerStop function Switching on the hob and the cooking zoneSwitching off the cooking zone Switching off the hobDeactivating the sensor lock Sensor / child safety lockAutomatic switch-off timer Activating the sensor lockQuick start cooking Power level set Quick start cooking Time minsecCooking guidelines Setting Type of FoodNever Steam Clean the Appliance Cleaning and MaintenanceCleaning the glass ceramic hob Weekly cleaningProblem Possible Causes Solution TROUBLE-SHOOTINGVentilation InstallationSafety instructions for installing kitchen furniture Section cut from the work surface PositioningHob seal Inserting the hob into the hole in the work surface Fixing using bracketsHOB Rating Technical informationRating plate Electrical connectionInstructions for the installer
Top Page Image Contents