Smeg SE640ID1 manual Using the HOB, Operating power settings, Zone Number Zone Diameter

Page 13

Instructions for the User

8. USING THE HOB

8.1 Warnings and general advice

To operate a hob equipped with touch controls, lightly press the symbols printed on the surface of the hob.

Every pressure on a symbol is confirmed by a control beep.

On first connection to the electrical mains, an operating check will be carried out automatically and all the indicator lights will come on for a few seconds.

8.2 Operating power settings

The table below shows the maximum consumption of the hotplates when they are in operation.

ZONE

NUMBER

ZONE DIAMETER

160mm

200mm

160mm

MAX ABSORBED POWER

1400 W

2300 W

1400 W

200 mm

2300 W

Image 13

Contents Contents Plate Must not be Removed Instructions for USEInformation for Users Recycling Instructions OUR Environment PolicyAuthorised Technician or AT AN Authorised Service Centre Safety InstructionsPlease note Safety instructions Intended USE of the Appliance Before First USESaucepan recognition HobAdvantages of an induction hob Other functions Limitation on the duration of useProtection from overheating induction Saucepans suitable for use in induction cookingPower levels Advice on energy-savingPower level Suitable for PowerCooking zones Residual heat indicatorControl panel Using the Sensors Operating power settings Using the HOBMAX Absorbed Power Zone Number Zone DiameterSwitching off the cooking zone Switching on the hob and the cooking zoneSwitching off the hob Stop functionAutomatic switch-off timer Sensor / child safety lockActivating the sensor lock Deactivating the sensor lockQuick start cooking Power level set Quick start cooking Time minsecCooking guidelines Setting Type of FoodCleaning the glass ceramic hob Cleaning and MaintenanceWeekly cleaning Never Steam Clean the ApplianceProblem Possible Causes Solution TROUBLE-SHOOTINGSafety instructions for installing kitchen furniture InstallationVentilation Hob seal PositioningSection cut from the work surface Inserting the hob into the hole in the work surface Fixing using bracketsRating plate Technical informationElectrical connection HOB RatingInstructions for the installer