Smeg SE640ID1 manual Contents

Page 1

Contents
1. INSTRUCTIONS FOR USE	28
2. RECYCLING INSTRUCTIONS - OUR ENVIRONMENT POLICY	29
3. SAFETY INSTRUCTIONS	30
4. BEFORE FIRST USE	33
5. INTENDED USE OF THE APPLIANCE	33
6. DESCRIPTION OF THE APPLIANCE AND THE CONTROLS ON THE FRONT PANEL	34
7. USING THE SENSORS	38
8. USING THE HOB	39
9. CLEANING AND MAINTENANCE	44
10. TROUBLE-SHOOTING	45
11. INSTALLATION	46

INSTRUCTIONS FOR THE USER: these contain user advice, description of the commands and the correct procedures for cleaning and maintenance of the appliance.

INSTRUCTIONS FOR THE INSTALLER: these instructions are intended for the qualified technician who must perform the installation, put it into operation and test the appliance.

Image 1

Contents Contents Plate Must not be Removed Instructions for USEInformation for Users Recycling Instructions OUR Environment PolicyAuthorised Technician or AT AN Authorised Service Centre Safety InstructionsPlease note Safety instructions Intended USE of the Appliance Before First USESaucepan recognition HobAdvantages of an induction hob Other functions Limitation on the duration of useProtection from overheating induction Saucepans suitable for use in induction cookingPower levels Advice on energy-savingPower level Suitable for PowerCooking zones Residual heat indicatorControl panel Using the Sensors Operating power settings Using the HOBMAX Absorbed Power Zone Number Zone DiameterSwitching off the cooking zone Switching on the hob and the cooking zoneSwitching off the hob Stop functionAutomatic switch-off timer Sensor / child safety lockActivating the sensor lock Deactivating the sensor lockQuick start cooking Power level set Quick start cooking Time minsecCooking guidelines Setting Type of FoodCleaning the glass ceramic hob Cleaning and MaintenanceWeekly cleaning Never Steam Clean the ApplianceProblem Possible Causes Solution TROUBLE-SHOOTINGSafety instructions for installing kitchen furniture InstallationVentilation Hob seal PositioningSection cut from the work surface Inserting the hob into the hole in the work surface Fixing using bracketsRating plate Technical informationElectrical connection HOB RatingInstructions for the installer