Smeg SE640ID1 manual Instructions for the installer

Page 24

Instructions for the installer

1 - Operation at 380-415V2N˜:use a H05V2V2-F type four-core cable (4 x 2.5 mm2 cable);

2 - Operation at 220-240V˜:use a H05V2V2-F type three-core cable (3 x 4 mm2 cable);

The end to be connected to the appliance must have an earth wire (yellow-green) at least 20 mm longer than the others.

The manufacturer cannot be held liable for damage to persons or things caused by failure to observe the above instructions or by tampering with any part of the appliance.

Image 24

Contents Contents Instructions for USE Plate Must not be RemovedRecycling Instructions OUR Environment Policy Information for UsersSafety Instructions Authorised Technician or AT AN Authorised Service CentrePlease note Safety instructions Before First USE Intended USE of the ApplianceHob Saucepan recognitionAdvantages of an induction hob Limitation on the duration of use Other functionsProtection from overheating induction Saucepans suitable for use in induction cookingAdvice on energy-saving Power levelsPower level Suitable for PowerResidual heat indicator Cooking zonesControl panel Using the Sensors Using the HOB Operating power settingsMAX Absorbed Power Zone Number Zone DiameterSwitching on the hob and the cooking zone Switching off the cooking zoneSwitching off the hob Stop functionSensor / child safety lock Automatic switch-off timerActivating the sensor lock Deactivating the sensor lockPower level set Quick start cooking Time minsec Quick start cookingSetting Type of Food Cooking guidelinesCleaning and Maintenance Cleaning the glass ceramic hobWeekly cleaning Never Steam Clean the ApplianceTROUBLE-SHOOTING Problem Possible Causes SolutionInstallation Safety instructions for installing kitchen furnitureVentilation Positioning Hob sealSection cut from the work surface Fixing using brackets Inserting the hob into the hole in the work surfaceTechnical information Rating plateElectrical connection HOB RatingInstructions for the installer