Smeg CS120A-6, CS120-6 manual Final Operations, Adjustment of minimum for natural gas

Page 9

Instructions for the installer

4. FINAL OPERATIONS

After replacing the nozzles, reposition the flame-spreader crowns, the burner caps and the grids.

Following adjustment to a gas other than the preset one, replace the gas adjustment label fixed to the appliance with the one corresponding to the new gas. This label is in the packet together with the nozzles.

4.1Adjustment of minimum for natural gas

Light the burner and turn it to the minimum

position . Extract the gas tap knob and turn the adjustment screw at the side of the tap rod until the correct minimum flame is achieved.

Replace the knob and check burner flame stability: (rapidly turning the knob from maximum to minimum position, the flame should not go out). Repeat the operation on all the gas taps.

4.2 Regulation of minimum for LPG

For regulating the minimum with LPG, the screw at the side of the tap rod must be turned clockwise all the way.

The bypass diameters for each individual burner are shown in paragraph “3.2 Burner and nozzle characteristics table”. When adjustment is complete, re-seal the by-passes using wax or an equivalent material.

49

Image 9

Contents Contents Instructions for Safe and Proper USE IntroductionIntroduction Positioning and levelling of the appliance Installation of the ApplianceElectrical connection This rating plate must never be removedInstructions for the installer 4Connecting to natural and LPG gas Please see connection Ventilation requirementsInstruction for wall fixing only on some models Changing nozzles Adaptation to Different Types of GASArrangement of burners on cooking hob Burner and nozzle characteristics tableLPG G30/G31 28/37 mbar Natural GAS G20 20 mbarAdjustment of minimum for natural gas Final OperationsRegulation of minimum for LPG Mounting the rear top upstand Description of Controls Front control panelMain Oven Thermostat Knob Function Switch Knob Cooking HOB Burner Command KnobBarbecue Element Power Regulator Knob Auxiliary Oven Thermostat Knob Auxiliary Oven Variable Grill KnobSetting the time Electronic Analogue ClockList of Functions Minute-minder Programming Demo Function Practical advice for using the cooking hob burners USE of the Cooking HOBLighting of the cooking hob burners Using the griddle plate USE of the OvensDiameter of containers Oven Light Cooling fanStorage compartment Accessories on Request AccessoriesInstructions for the user Cooking Hints Function Switch Thermostat Selector Switch fromTraditional cooking main and auxiliary ovens To 250CFunction Switch Thermostat Switch AT Maximum Function Switch Thermostat Selector Switch from 50 to 250CHot-air cooking main oven Grill cooking main ovenFunction Switch Thermostat Switch from 50 to 200C Hot-air grilling main ovenVariable grill cooking auxiliary oven Function Switch Thermostat Switch in Position Delicate cooking auxiliary ovenDefrosting main oven Spit cooking main oven Spit cooking auxiliary oven Function Switch Variable Grill Choice Between MIN ¾ MAXRecommended cooking table Traditional CookingHOT-AIR Cooking Cleaning stainless steel Cleaning and MaintenanceOrdinary Daily Cleaning Food stains or residuesBarbecue griddle Cleaning of cooking hob componentsBarbecue drip tray GridsIgnition plugs and thermocouples Cleaning of ovens without self-cleaning panelsUsing the self-cleaning liners Self-cleaning linersLooking after the self-cleaning liners Assembling the self-cleaning linersReplacement of light bulbs Extraordinary MaintenanceOven door gaskets Removing the doorLubrication of gas taps By a specialised technician