Smeg CIR34AX3 manual Fixing 90 cm hobs on 60 cm base unit

Page 5

Instructions for the installer

Bracket ‘A’ in the 1st slot

Bracket ‘A’ in the 2nd slot

Bracket ‘B’

Short sides

Long sides

2.2Fixing 90 cm hobs on 60 cm base unit

If a 90 cm hob is to be bracketed to a 60 cm base unit, the 2 central brackets “A” have to be used in addition to the side brackets “B” as shown in the drawing below. The gas connection also has to be turned through 90° in relation to the original position.

Image 5

Contents Contents Instructions for Safe and Proper USE IntroductionDeclines ALL Responsibility for Improper USE Never Unplug by Pulling on the CablePlate on the Casing Must not be Removed Attachment to the support structure Instructions for the installerPositioning of the HOB Fixing 90 cm hobs on 60 cm base unit Clearance above and around domestic appliances Requirements Room ventilation Discharge of combustion products GAS Connection Electrical Connection Adaptation to Different Types of GAS Removing the hob models with built-in control Panel Adjustment for UlpgAdjustment for natural gas Final Operations Adjustment of minimum for natural gasBurners Cm hobsLubrication of gas taps Practical advice for using the burners Using the HOBInstructions for the user Ignition of the burnersDiameter of containers Using the electric elementsElectric elements Turning on electric elementsTo use correctly remember to Cleaning of cooking hob components Cleaning and MaintenanceCleaning Cover Preventive maintenanceElectric element Problem Problems and CausesCause What to doPage 914773237/ B