Instructions for the Installer
3.6 Adjusting the oven burner (for gas oven models only)
To adjust the oven burner, open the oven door and proceed as follows:
•Remove the oven tray and its shelf.
•Lift and extract the oven bottom.
3.6.1Changing the oven + grill burner nozzle
•Undo the oven burner fixing screw A.
•Push the burner B to the right until the nozzle is accessible.
•Use a 13 socket wrench to change the nozzle, fitting the one for the type of gas to be used (see point “3.2/3.3 Burner and Nozzle Data Tables”).
3.6.2Adjusting the oven+grill burner primary air flow
• Undo the adjuster screw "A" of the air regulator sleeve.
•Turn the regulator sleeve "B" into the position for the type of gas to be
used, consulting the table below.
• Tighten the adjuster screw and restore the seals.
• When the operation is complete, reassemble the burner correctly.
|
| NATURAL GAS (N) |
| G30/G31 (LPG) |
| G30/G31 (LPG) | G 110 – TOWN GAS |
|
|
| 90 cm Oven |
| 60cm Oven | ||
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
X = |
| 5 mm |
| 15 mm |
| 10 mm | 3 mm |
|
|
|
|
|
|
|
|
14