Smeg CB61VES manual Bottled gas connection, Connection with steel hose for all types of gas

Page 7

Instructions for the Installer

2.4.4Bottled gas connection

Use a pressure regulator complaint with the relevant standards and make the connection to the gas cylinder in accordance with the relevant regulations.

Make sure that the gas supply pressure is as stated in the table in point "3.2/3.3 Burner and Nozzle Data Tables".

Screw the small hose connector F onto the large hose connector A and connect the resulting unit to the gas union B (or use the hose connector G for connection straight to the gas union B) and fit the seal C. Fit the ends of the rubber hose H onto the hose connector A+F (or G) and to

the outlet union of the pressure reducer on the gas cylinder. Fix the end of the hose H to the hose connector A+F (or G) using the regulation hose clamp I .

The hose connector G shown is not supplied with the appliance. Use only hose connectors compliant with the relevant regulations.

2.4.5Connection with steel hose (for all types of gas)

This type of connection can be made on both built-in and free-standing appliances. Use only regulation steel hoses no more than 2 metres long. Screw the end of the hose L , fitting the seal C, onto the gas union B with external ½" gas thread (ISO 228-1).

When installation is complete, check for any leaks with a soapy solution, never with a naked light.

9

Image 7

Contents Table of Contents Never Attempt to Repair the Appliance Precautions for Safety and USEChildren AT a Safe Distance Installing the Appliance Instructions for the InstallerThis nameplate must never be removed Electrical connectionRoom ventilation Combustion gas dischargeNatural and town gas connection Solution, never with a naked lightGas connection Connection with rubber hoseConnection with steel hose for all types of gas Bottled gas connectionChanging the hob nozzles Adapting to Different Types of GASCapacity G30 G31 100 mm Burner and Nozzle Data Tables 50-60 cm ModelsRated Heat Burner Natural GAS G20 20 mbar Capacity Burner and Nozzle Data Tables 90 cm Models Burners Hob burner layoutNatural GAS N Adjusting the oven burner for gas oven models onlyAdjusting the oven+grill burner primary air flow Changing the oven + grill burner nozzleAdjusting the oven burner minimum Adjusting the hob burner minimum for bottled gasFinal Operations Wall fixing on some models only Fitting the rear splash-back on some models onlyPositioning and levelling the appliance HOB Burner Control Knob Description of Front Panel Controls275C Static Electric Oven Function Knob On Some Models only Electric Oven Thermostat Knob On Some Models onlyPractical hints for using the hob burners Using the HOBLighting the hob burners 60 X Pan diameters 60 cm ModelsPan diameters 90 cm Models 50 XSwitching on the electric plates Switching on the electric plateHow to use the electric plates Lighting the burner by hand Using the OvenPrecautions and General Advice Using the gas ovenUsing the electric grill Foods Shelf on Runner How to use the grillLighting the gas grill burner by hand Using the gas grillStorage compartment Gas cylinder compartment for the relevant models onlyAutomatic cooking Setting the timeElectronic Programmer on Some Models only Semiautomatic cookingStopping the buzzer TimerAdjusting the buzzer volume End of cookingAnalogue Clock on Some Models only Digital Timer on Some Models onlyCleaning enamel Cleaning and MaintenanceCleaning the hob components Burner caps and flame diffuser rings Cleaning the ovenDoor glazing Pan standsRemoving the door Extraordinary MaintenanceLubricating the gas oven taps and thermostat Changing the light bulb