Instructions for the User
5. DESCRIPTION OF FRONT PANEL CONTROLS
All the cooker's control and monitoring devices are placed together on the front panel. The table below provides the key to the symbols used.
FRONT | CENTRAL BURNER |
REAR | GAS OVEN THERMOSTAT |
REAR | ELECTRIC OVEN THERMOSTAT |
FRONT | ELECTRIC OVEN FUNCTION KNOB |
REAR CENTRAL BURNER | BURNER IGNITION BUTTON |
FRONT CENTRAL BURNER | OVEN LIGHT SWITCH |
If the cooker is equipped with an electronic programmer, before using the oven check that the symbol appears on the display; see point “8.1 Setting the time".
BURNER IGNITION BUTTON (ON SOME MODELS ONLY)
On models fitted with this button, to light the flame, turn the burner ignition knob
pressing it down. To adjust the flame, turn the knob to the zone between the maximum and the minimum settings. To turn off the burner, turn the knob to the position.
HOB BURNER CONTROL KNOB
On models without burner ignition button, to light the flame press down the knob and turn it
GAS OVEN THERMOSTAT AND GRILL ELEMENT KNOB
(ON SOME MODELS ONLY)
This knob turns on the gas supply to light the burner inside the oven, or operates the grill/rotisserie function. The gas oven cooking temperature is set by turning the knob
275°C.
For instructions for lighting the gas oven, refer to point “7.2 Using the gas oven”.
17