Smeg LVF649B instruction manual User instructions, Troubleshooting Minor Problems

Page 31
TROUBLESHOOTING MINOR PROBLEMS

User instructions

BEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSE:

Check that there are no deposits of sludge or rust inside the water pipe: if there are, allow the water to run from the water supply tap for a few minutes.

Plug the power cord back into the socket.

Reconnect the water intake hose and open the tap again.

TROUBLESHOOTING MINOR PROBLEMS

In some cases it is possible to remedy minor problems by referring to the following instructions:

If the program fails to start, check that:

the dishwasher is connected to the electrical power supply;

there is no power failure;

the water tap is open;

the dishwasher door is properly closed.

If water remains inside the dishwasher, check that:

the drain hose is not kinked;

the drain siphon is not obstructed;

the dishwasher filters are not clogged.

If the dishes are not being cleaned properly, check that:

the correct amount of detergent has been added;

there is regenerating salt inside the special container;

the dishes are being loaded correctly;

the selected program is suitable for the dish types and their degree of soiling;

all the filters are clean and positioned correctly;

the spray arm nozzles are not obstructed;

there is no object obstructing the rotation of the spray arms.

30

Image 31
Contents Page Contents NEVER BE REMOVED Safety instructions1. Safety and operating instructions USES OTHER THAN THOSE DESCRIBED ABOVETHIS DISHWASHER MUST BE USED BY ADULTS Safety instructionsAQUASTOP MODELS Safety instructionsAPPLIANCE 2. Installation and hook-up Installation instructionsFor free-standingmodels only 2.1 Water supply connection Installation instructionsCONNECTING TO THE WATER SUPPLY DRAIN CONNECTION2.2 Electrical connection and precautions Installation instructionsL = brown N = blue = yellow-green Fuse replacement Installation instructionsFOR GREAT BRITAIN ONLY 1 ON/OFF BUTTON 2 START/PAUSE BUTTON User instructions3. Description of the controls 3.1 Front panelUser instructions SETTING THE WASHING PROGRAMBefore starting a washing program make sure that SWITCHING ONUser instructions 3.2 Washing programsCHANGING A PROGRAM User instructionsEND OF PROGRAM INTERRUPTION A PROGRAMdisponibile in tutti i programmi escluso lammollo User instructionsDELAYING THE PROGRAM presente solamente su alcuni modelliTO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT User instructionsREMOVING THE DISHES 4.1Using the water softening system 4. Operating instructionsUser instructions User instructions ADJUSTING THE WATER SOFTENING SYSTEMUser instructions 4.2 Using the rinse aid and detergent dispensersWATER HARDNESS TABLE User instructions ADJUSTING THE RINSE AID DISPENSER SETTINGADDING THE RINSE AID ADDING THE DETERGENT User instructionsThe market offers liquid and powder detergents with differing chemical compositions, which may contain phosphates, or be phosphate-freebut contain natural enzymes User instructions4.3 General warnings and recommendations User instructionsItems which are not dishwasher-safe User instructionsLOADING THE LOWER BASKET 4.4 Using the basketsUser instructions LOWER BASKETinsert User instructionsCUTLERY BASKET UPPER BASKETLOADING THE UPPER BASKET User instructionsLoading examples Models with cutlery racks User instructions ADJUSTING THE UPPER BASKETVersion B User instructions User instructions 5. Cleaning and maintenanceCLEANING THE WATER INTAKE FILTER CLEANING THE SPRAY ARMSFill the rinse aid dispenser CLEANING THE FILTER UNITUser instructions PROLONGED DISUSEUser instructions TROUBLESHOOTING MINOR PROBLEMSIf the program fails to start, check that there is rinse aid inside the special container User instructionsUser instructions 6. TroubleshootingFAULT Safety levelDESCRIPTION FAULTUser instructions E7 E8 E9Width TECHNICAL DATAWater supply pressure Electrical characteristics User instructionseinstellen mollelaterali primadell’installazionedes ressortslateraux avant l’installation Montare la porta e regolarelatensione delle