Smeg CA01-3 instruction manual Table of Programs

Page 4

User instructions

TABLE OF PROGRAMS

DURATION

CONSUMPTION

CYCLE

1

SOAK

2

NORMAL 65°C

3

INTENSIVE 65°C

4

DAILY

65°C

4

ECONOMY 55°C (*)

5

RINSE

SWITCH AND

TYPE AND DEGREE

BUTTON

OF DIRT ON DISHES

 

 

PANS AND DISHES

PENDING COMPLETION

OF THE LOAD

PANS AND DISHES

WITH NORMAL DIRT

VERY DIRTY PANS AND

DISHES, EVEN WITH

DRIED-ON DIRT

DISHES WITH

NORMAL DIRT

DISHES WITH

LIGHT DIRT

+ECO BUTTON

DISHES FOR RINSING

AND DRYING

PROGRAM

SEQUENCE

Cold prewash

Cold prewash Wash at 65°C

2 cold rinses Rinse at 65°C Dry

Cold prewash Wash at 65°C

Cold rinse Rinse at 65°C

Dry

Wash at 65°C

Cold rinse Rinse at 65°C

Dry

Wash at 55°C

Cold rinse Rinse at 65°C

Dry

Cold rinse Rinse at 65°C

Dry

MINUTES

(2)

6

130

180

170

160

70

WATER

 

POWER

LITRES (1)

 

KWh (2)

4

0,01

24

1,65

21

1,62

16

1,60

17

1,05

11

0,90

Only run the soak program with half loads.

(*)Reference program as per EN 50242 standard.

(–) Not present.

(1) Average power consumption with the softener set on level 2.

(2)The cycle duration and power consumption may vary according to the water and room temperatures, and the type and amount of dishes.

The washing cycle will not take place if the dishwasher door is left open or not properly closed.

13

Image 4
Contents For Cleaning Dishwashers Contents Description of the controls Setting the Washing ProgramFront panel Table of Programs Cancelling the Current Program Washing programsBefore starting a washing program make sure that Correct amount of detergent has been added to the dispenserTo Save on ENERGY! … and Protect the Environment END of Cycle Removing the DishesAdjusting the Water Softening System Water Hardness TableFor Cleaning Dishwashers Contents Safety instructions Safety and operating instructionsSafety instructions Aquastop Models Installation and hook-up For free-standing models onlyWater supply connection Connecting to the Water SupplyDrain Connection Electrical connection and precautions If the Appliance is Provided with a Plugless Supply CordWhen Cleaning and Maintaining the Appliance For Great Britain onlyUsing the water softening system Operating instructionsUsing the rinse aid and detergent dispensers Adjusting the Rinse AID Dispenser Setting Adding the Rinse AIDAdding the Detergent General warnings and recommendations ProductsUser instructions Using the baskets EN 50242 Standard Loads for Certification BodiesLower Basket Loading the Lower BasketCutlery Basket Upper BasketLoading the Upper Basket Adjusting the Upper Basket Version BUser instructions Cleaning the Water Intake Filter Cleaning and maintenanceCleaning the Spray Arms Cleaning the Filter Unit Fill the rinse aid dispenser Shut off the water supply tapIf the dishes are not being cleaned properly, check that Reconnect the water intake hose and open the tap againIf the program fails to start, check that If water remains inside the dishwasher, check thatIf the dishes fail to dry or remain dull, check that If there are visible traces of rust inside the tank135 145