Smeg CA01-3 instruction manual Washing programs, Before starting a washing program make sure that

Page 5

User instructions

1.2 Washing programs

Before starting a washing program make sure that:

•The water supply tap is open.

•The correct amount of detergent has been added to the dispenser.

•The baskets have been correctly loaded.

•The spray arms are able to rotate freely and without obstruction.

•The dishwasher door is securely closed.

CANCELLING THE CURRENT PROGRAM

To cancel the program in progress the dishwasher must be switched off by pressing the ON/OFF key (2).

Turn the program selector to SOAK and wait for the dishwasher to start. On completion of the program, switch off the dishwasher by pressing the ON/OFF key (2).

CHANGING THE PROGRAM

To change the program in progress the dishwasher must be switched off by pressing the ON/OFF key (2).

Turn the program selector to the program required and then switch the dishwasher on again by pressing ON/OFF key (2). The dishwasher will carry out the new program automatically.

4

3	2		5			1
	4

3

2

5

1

14

Image 5

Contents For Cleaning Dishwashers Contents Front panel Setting the Washing ProgramDescription of the controls Table of Programs Washing programs Cancelling the Current ProgramBefore starting a washing program make sure that Correct amount of detergent has been added to the dispenserTo Save on ENERGY! … and Protect the Environment Removing the Dishes END of CycleWater Hardness Table Adjusting the Water Softening SystemFor Cleaning Dishwashers Contents Safety and operating instructions Safety instructionsSafety instructions Aquastop Models For free-standing models only Installation and hook-upDrain Connection Connecting to the Water SupplyWater supply connection If the Appliance is Provided with a Plugless Supply Cord Electrical connection and precautionsFor Great Britain only When Cleaning and Maintaining the ApplianceOperating instructions Using the water softening systemUsing the rinse aid and detergent dispensers Adding the Rinse AID Adjusting the Rinse AID Dispenser SettingAdding the Detergent Products General warnings and recommendationsUser instructions EN 50242 Standard Loads for Certification Bodies Using the basketsLoading the Lower Basket Lower BasketUpper Basket Cutlery BasketLoading the Upper Basket Version B Adjusting the Upper BasketUser instructions Cleaning the Spray Arms Cleaning and maintenanceCleaning the Water Intake Filter Fill the rinse aid dispenser Shut off the water supply tap Cleaning the Filter UnitReconnect the water intake hose and open the tap again If the dishes are not being cleaned properly, check thatIf the program fails to start, check that If water remains inside the dishwasher, check thatIf there are visible traces of rust inside the tank If the dishes fail to dry or remain dull, check that135 145