Smeg CA01-3 instruction manual Adjusting the Water Softening System, Water Hardness Table

Page 8

User instructions

ADJUSTING THE WATER SOFTENING SYSTEM

The dishwasher is equipped with an device for the user to adjust the water softening system according to the hardness of the water supply.

According to the machine model, the selector which acts on the adjustment may be located:

•inside the plastic locking ring located on the right-handside, inside the dishwasher;

•inside the water softener, just below the cap.

Both allow for adjustment to 5 settings:

WATER HARDNESS TABLE

	WATER HARDNESS					SETTING

German Degrees (°dH)			French Degrees (°dF)

0	- 4		0	- 7		Setting N. 1 NO SALT

5 - 15			8 - 25			Setting N. 1

16	- 23		26	- 40		Setting N. 2

24	- 31		41	- 60		Setting N. 3

32	- 47		61	- 80		Setting N. 4

48	- 58		81 - 100			Setting N. 5

Contact your local water board for information on the hardness of your water supply.

17

Image 8

Contents For Cleaning Dishwashers Contents Front panel Setting the Washing ProgramDescription of the controls Table of Programs Cancelling the Current Program Washing programsBefore starting a washing program make sure that Correct amount of detergent has been added to the dispenserTo Save on ENERGY! … and Protect the Environment END of Cycle Removing the DishesAdjusting the Water Softening System Water Hardness TableFor Cleaning Dishwashers Contents Safety instructions Safety and operating instructionsSafety instructions Aquastop Models Installation and hook-up For free-standing models onlyDrain Connection Connecting to the Water SupplyWater supply connection Electrical connection and precautions If the Appliance is Provided with a Plugless Supply CordWhen Cleaning and Maintaining the Appliance For Great Britain onlyUsing the water softening system Operating instructionsUsing the rinse aid and detergent dispensers Adjusting the Rinse AID Dispenser Setting Adding the Rinse AIDAdding the Detergent General warnings and recommendations ProductsUser instructions Using the baskets EN 50242 Standard Loads for Certification BodiesLower Basket Loading the Lower BasketCutlery Basket Upper BasketLoading the Upper Basket Adjusting the Upper Basket Version BUser instructions Cleaning the Spray Arms Cleaning and maintenanceCleaning the Water Intake Filter Cleaning the Filter Unit Fill the rinse aid dispenser Shut off the water supply tapIf the dishes are not being cleaned properly, check that Reconnect the water intake hose and open the tap againIf the program fails to start, check that If water remains inside the dishwasher, check thatIf the dishes fail to dry or remain dull, check that If there are visible traces of rust inside the tank135 145