Smeg S108X-5 manual DEMO Function, Instructions for the user

Page 13
3.2.4"DEMO" Function

Instructions for the user

Cooking start: as well as setting a cooking duration time, the user can also set the cooking start time (up to 12 hours after the current time). To set the cooking start/end time, proceed as follows.

-Set the cooking duration time as described in the previous point.

-Within 6/7 seconds after the last time the Manual backgroundManual backgroundManual background or Manual backgroundManual backgroundManual background keys are pressed, press the Manual background key to set the cooking start time. The display

will show the current time with the inside segments indicating the

cooking end time illuminated. Use the Manual backgroundManual backgroundManual background and Manual backgroundManual backgroundManual background keys to set the cooking start time.

-6/7 seconds after the last time a key is pressed, the display will show the current time and the cooking start and end times, indicated by the illuminated inside segments. The segments on the display will be constantly on until the current time is the same as the cooking start time; as soon as the current time reaches the cooking start time set, all the inside segments will start to flash, indicating that the oven has started cooking.

-When the end of the cooking time is reached, the timer will switch off the oven heating elements, the beeps will start and the numbers on the dial will flash.

-To reset the entire program set, keep the central key Manual background pressed for 1 or 2 seconds: if cooking has already started the oven will have to be switched off by hand.

- The image on the right shows an example of programming: the current time is 7.06 and cooking is programmed to start at 8 o'clock and finish at 9.

- At 8 o'clock, the inside segments between 8 and 9 will start to flash and the hour pointer will remain still.

Caution: for the oven to start cooking after the programming procedure just described, the thermostat and function selector must be properly set on the temperature and function required.

3.2.4"DEMO" Function

Models with analogue/digital programmer feature a "DEMO" function which deactivates the heating elements while leaving the other functions

unchanged. To activate it, simply press the Manual backgroundManual backgroundManual background, Manual background and Manual background keys for 3/4 seconds. A confirmation beep will inform the user that the function is active. To deactivate it, simply repeat the same procedure.

39

Page 12 Page 14
Image 13
Page 12 Page 14
Contents 1. INSTRUCTIONS FOR SAFE AND PROPER USE 2. INSTALLATION Contents5. AVAILABLE ACCESSORIES 6. COOKING HINTS 7. CLEANING AND MAINTENANCE 8. ADDITIONAL MAINTENANCE1. INSTRUCTIONS FOR SAFE AND PROPER USE IntroductionTHE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR IMPROPER USE NEVER UNPLUG BY PULLING ON THE CABLETHE PLATE MUST NOT BE REMOVED 2. INSTALLATION Instructions for the installer2.1 Electrical connection This label must never be removedFor operation on 380-415V2N∼ use an H05RR-F / H05RN-F type three-core cable 3 x 4 mm2H05RR-F / H05RN-F type four-core cable 4 x 2.5 mm2 For operation on 380-415V3N∼ use an2.2 Installing the oven Never use the oven door to lever the oven into place when fitting 2.3 Connecting the hob to the ovenAvoid exerting too much pressure on the oven door when open 3. DESCRIPTION OF CONTROLS Instructions for the user3.1 Front control panel FUNCTION CONTROL KNOBHOB CONTROL KNOB PILOT LIGHT GREENHOB CONTROL KNOB WITH DUAL ZONES 3.2 Electronic Analogue Clock 3.2.1 Setting the timeLIST OF FUNCTIONS 3.2.2 Minute-minder Caution cooking times of more than 6 hours cannot be set 3.2.3 Programming3.2.4 DEMO Function 4. USE OF THE OVEN 4.1 Warnings and general advice4.2 Cooling system 4.3 Oven lightSome models do not feature all accessories 5. AVAILABLE ACCESSORIESAccessories available on request FUNCTION SWITCH FUNCTION SWITCH THERMOSTAT SWITCHTHERMOSTAT SWITCH 6. COOKING HINTS6.4 Fan grilling multifunction models 6.3 Grill cookingGrill function must be used only with the door closed 6.5 Delicate cooking in some models only FUNCTION SWITCH THERMOSTAT SWITCH IN POSITION6.6 Defrosting multifunction models GRILLING TRADITIONAL COOKING6.7 Recommended cooking table FIRST COURSESFAN COOKING 7.1 Cleaning stainless steel 7. CLEANING AND MAINTENANCE7.2 Cleaning of the oven without self-cleaning panels 7.1.1 Ordinary Daily Cleaning7.3.1 Using the self-cleaning liners 7.3 Self-cleaning liners only on some models7.3.2 Looking after the self-cleaning liners 7.3.3 Assembling the self-cleaning liners8.1 Replacement of light bulb 8. ADDITIONAL MAINTENANCEBefore any intervention, disconnect the power supply Only use oven bulbs T 300C8.3 Oven door seal 8.2 Removing the door
Top Page Image Contents