Instructions for the User
8.6.2 Setting the cleaning cycle
Turn the function selection knob to select one of the
two cleaning cycles out of 
and 
.
To start the cleaning cycle (Pyrolysis), press
followed by 
.
Press and hold 
; press 
or 
to set the
duration of the cycle between a minimum of 1h 30m
and a maximum of 3h 00m (apart from the 
cycle where the duration is set at 1h 30m).
Two minutes after the cleaning cycle (Pyrolysis) starts, a locking device which prevents opening of the door will be tripped. The relevant light will switch on to indicate that the locking device has been activated.
At the end of the cleaning cycle, the locking device will remain active until the temperature inside the oven has reached a safety threshold. When the oven has cooled down, collect the residues from automatic cleaning with a damp microfibre cloth.
To select a cleaning cycle with a delayed start,
after setting the duration press 
.
The time when the cleaning cycle will terminate will appear on the display.
Press and hold 
, and press 
or 
to set
the time at which you wish to terminate the cleaning cycle.
It is not possible to select any functions once the door locking device has been
activated. Wait for 
to go out.
39