Smeg SA561X-9 installation instructions Extraordinary Maintenance, Replacing the light bulb

Page 42

Instructions for the User

9. EXTRAORDINARY MAINTENANCE

The oven may require extraordinary maintenance or replacement of parts subject to wear such as gaskets, bulbs, etc. The following instructions describe how to carry out these minor maintenance operations.

Before any intervention that requires access to live parts, disconnect the power supply of the appliance.

9.1Replacing the light bulb

If a light bulb needs to be replaced because it is worn or burnt out (in multifunction models remove the guide frames; see “8.5.1 Removing guide frames”).

Then remove the bulb cover using a tool (e.g. a screwdriver).

Remove the bulb by sliding it out as shown.

On some models only: the bulbs are

halogen bulbs, so do not touch them

directly with your fingers, wrap them

in an insulating material.

Replace the bulb with one of the same type (25W). Replace the cover correctly, so that the moulded part of the glass is facing the door.

Press the cover down as far as it will go so that it attaches completely to the bulb support.

43

Image 42
Contents SA561X-9 Contents General instructions Instructions for USEGeneral instructions Safety Precautions General instructions Instructions for disposal Environmental ResponsibilityGET to Know Your Oven Multifunction PyrolyticAvailable Accessories Some models are not provided with allUsing the rack or tray Using the support rackMechanical lock must always face the back of the oven Using the handle Using the rotisserie rod on some models only Using the Oven General Description Oven runnersOvens with frames Ovens with runners Cooling system Oven inside lightsInstructions for the User Description of the controls on the front panel Oven Thermostat KnobInstructions for the User Instructions for the User Function Knob Setting the time Using the timerElectronic programmer on some models only Stopping the buzzer Semi-automatic cookingAutomatic cooking Deleting the set data Adjusting the buzzer volumeEnd of semi-automatic / automatic cooking Modifying the set dataCooking with the Oven ECOFAN-ASSISTED Grill Advice for cooking desserts and biscuits Cooking advice and instructionsAdvice for cooking meat Advice for defrosting and provingAdvice for cooking with the Grill and the Fan-assisted grill To save energyCooking process information table Meat1ST Surface 2ND Surface Pizza 280 190 180 160 170 150 Proving and defrosting functions On pyrolytic models onlyProving Quantity Ordinary daily cleaning Cleaning and MaintenanceCleaning stainless steel Cleaning the door glazingCleaning the inside of the oven Ovens with runners Removing guide frames Pyrolysis automatic oven cleaning on some models only Before starting the automatic cleaning cycle Cleaning Light Dirt Medium Dirt Heavy Dirt DurationSetting the cleaning cycle To select a cleaning cycle with a delayed startVapor Clean assisted oven cleaning on some models only Before starting the assisted cleaning cycleSetting the assisted cleaning cycle End of the assisted cleaning cycle On some models only the bulbs are Extraordinary MaintenanceReplacing the light bulb Directly with your fingers, wrap themRemoving the door With moveable leversWith pins Removing the door seal Removing the internal glass panelsFor multifunction models only Removing the middle glass panels pyrolytic models CleaningRemoving the internal glass panel Multifunction modelsElectrical connection Installing the ApplianceCable replacement Do not remove this plate for any reasonPositioning the oven Instructions for the installer MeasurementsInstructions for the installer Page Page 914773682/ B