Andrew manual Serial Port Selection at Program Startup, ATC200-Lite Application Icon

Section 3–Program Startup and ConfigurationATC200-Lite Teletilt® Remote Control Downtilt System

3.2 Serial Port Selection at Program Startup

1. The install process places an icon for the program on the desktop (Figure 3-2).

2. Double click on the icon, shown in
Figure 3-2, to start the program. If the
PC is connected to the controller on
serial port 1, and if serial port 1 has
been made available to the program
by the PC, the program will select
that port by default. A successful	Figure 3-2. ATC200-Lite Application Icon.
connection will display the program’s
main screen (Figure 3-3).

Command Status/Response window displays program activity.

Figure 3-3. ATC200-Lite Main Screen.

3.If Serial Port 1 does not exist on the PC, or if the PC is not allowing serial port 1 to be accessed by the program, the program will prompt the user to select a different serial port (Figure 3-4).

Figure 3-4. Prompt for Serial Port Selection.

3- May 2005 Bulletin 639510