Smeg CE92GPX manual Adaptation to Different Types of GAS, Replacement of nozzles on the hob

Page 29

Instructions for the installer

17.ADAPTATION TO DIFFERENT TYPES OF GAS

Before performing any operations requiring access to powered parts, switch off the power supply to the appliance.

The cooker hob is preset for natural gas G20 (2H) at a pressure of 20 mbar. In the case of operation with other types of gas the burner nozzles must be changed and the minimum flame adjusted on the gas taps. To change the nozzles, proceed as described below.

17.1 Replacement of nozzles on the hob

This operation does not require the primary air to be adjusted.

1Extract the grids and remove all the caps and flame-spreader crowns;

2Unscrew the burner nozzles with a 7 mm socket wrench;

3Replace the nozzles according to the type of gas to be used and the description in paragraph "17.2 Burner and nozzle characteristics table";

4Replace the burners in the correct position.

62

Image 29

Contents Sommario Plate Must not be Removed Precautions for USERecycling Instructions OUR Environment Policy Never Attempt to Repair the Appliance Yourself Safety PrecautionsIntended USE General Description Getting to Know Your OvenAccessories available on request Before InstallationAvailable Accessories Instructions for the user Description of the Controls on the Front Panel Auxiliary Oven Functions / Temperature Selection Knob Main Oven Temperature Selection Knob PT1Main Oven Functions Selection Knob PT2 HOB Burner Control KnobSetting the current time Using the Main OvenFirst use Selecting a function10.4.1Semiautomatic cooking Programmed cooking proceduresModifying the data set 10.4.2Automatic cookingAutomatic cooking with selection of a recipe Cooking with selection of a recipeModifying the data set during cooking Making permanent changes to a recipe Table of predefined recipes Secondary menu Using the Secondary Oven Description of the selected functions Cooking in the OvenCooking Hints and Tips Hints on Using the AccessoriesCooking tables Practical hints for using the hob burners Using the HOBPan diameters BurnersCleaning and Maintenance 14.6.1Before starting the automatic cleaning cycle Pyrolysis automatic oven cleaning on some models only14.6.2Setting the cleaning cycle Changing the light bulb Extraordinary MaintenanceRemoving the door Removing the door sealOven display is completely off What to do ifOven does not heat up Controls do not respondElectrical connection Installing the ApplianceConnection to gas Ventilation requirementsExtraction of the products of combustion 16.4.2Connection to LPG Connection of natural and town gasAdaptation to Different Types of GAS Replacement of nozzles on the hobArrangement of the burners on the hob Burner and nozzle characteristics tablePositioning and levelling the appliance depending on model Regulation of the hob burner minimum level for natural gasRegulation of the hob burner minimum level for LPG