Andrew 5.6-Meter ESA manual Step

Step 3

Step 4

Attach 201316 support pairs to 201295/201296 joint assemblies as shown in Figure 15.

•Place supports back-to-back with edges out and flat of angle inward

•Install 45967 spacer at midpoints of support pairs

•Use 7/8 x 2-1/4 in (57 mm) hardware for each connection

Figure 15

Attach 201458 azimuth pivot assembly to 201316 support pairs. Attach 201596 mount- ing plates to 201458 azimuth pivot assembly tab as shown in Figure 16.

•Use 7/8 x 2-1/4 in (57 mm) hardware for each connection

•Insert bolts from rear of pivot assembly to connect supports

Figure 16

18 Installation Procedures