Andrew 5.6-Meter ESA manual Step

Step 7

Step 8

Attach second 201488 outrigger plate to 201487 panning frame assembly as shown in Figure 19.

•Use 7/8 x 2-1/4 in (57 mm) hardware

•Insert bolts from inside assembly to outrigger plate

Figure 19

Attach 201407 elevation axis assembly to 201487 panning frame assembly and 201295 joint assemblies as shown in Figures 20 and 21.

•Use 7/8 x 2-1/4 in (57 mm) hardware

•Insert bolts from elevation axis assembly to panning frame assembly and joint assem- bly

Figure 20

20 Installation Procedures