Light Bulb Replacement

True Food Service Equipment, Inc.

MAINTENANCE, CARE & CLEANING

SHELF MOUNTED BULB REPLACEMENT:

WARNING

When replacing a light bulb make sure power to the unit is either turned off or unplugged.

A.Unplug the light assembly from the receptacle on the interior side wall. Remove shelf and light assembly from cabinet.

B.Remove the lampshield by gently squeezing the sides together and rotating out (image 1).

C.Remove bulb from the corded end of assembly by holding the bulb and gently pulling up on spring loaded lampholder which will allow enough clearance to remove bulb (image 2).

NOTE

All spring loaded lampholders are located on the left side of the cabinet as you face the front.

NOTE

Please be aware of your local ordinances for dis- posal of old florescent bulbs. These bulbs should be disposed of in a safe and proper manner.

D.Install new bulb using spring loaded lamp- holder.

E.Reinstall light assembly and shelf. Plug cord into side wall receptacle.

INTERIOR TOP BULB REPLACEMENT:

WARNING

When replacing a light bulb make sure power to the unit is either turned off or unplugged.

A. Remove the lampshield by gently squeezing

the sides together and rotating out (image 3).

B. Remove bulb by gently pushing bulb back into

spring loaded lampholder which will allow

enough clearance to remove bulb (image 4).

C. Install new bulb using spring loaded lamp-

holder.

D. Reinstall light lampshield by sliding rear "U"

channel of lampshield over metal bracket and

➟

Squeeze lampshield and rotate out.

➟

Squeeze lampshield and rotate out.

➟

Squeeze lampshield "U" channel into position over metal bracket.

➟

Remove bulb by gently pulling up on spring loaded lampholder.

➟

Remove bulb by gently pushing bulb into spring loaded lamp- holder.

lampshield "U" channel in position over metal bracket.

gently squeezing lampshield to fit front "U"

channel over front metal bracket (images 5-6).

E. Image 7 shows assembly properly installed.

Interior top light assembly properly installed.