3.Push the Start/Enter pad. The Minute Timer will begin counting down immediately after the timer is started.
When time is up, “End”will show in the large display and you will hear four
NOTE: To disable the reminder tones, push and hold the Timer Set pad for 4 seconds. To reactivate the tones, follow the same procedure.
To cancel the Minute Timer:
lPush the Timer Off pad. The time of day will show in the display.
Using the Off/Cancel pad
The Off/Cancel pad will cancel any command pad except for the Timer Set pad. When the Off/ Cancel pad is pushed, the display will show the time of day or, if Minute Timer is also being used, the time remaining.
Audible signals
Audible signals tell you if a function is entered correctly or not. They also tell you when a cycle is completed.
To shut off all signals except for the end-of- timer tone:
1.Press and hold the Stop Time pad for 4 seconds.
2.A short tone will sound to tell you the signals have been changed.
Repeat the above steps to turn the signals back on.
13