Whirlpool SGS375H Removing The Oven Door, To clean the burners, Caring For Your Range, pin hole

Page 30

SEALED SURFACE BURNERS AND COOKTOP (CONT.)

Alignment pin

CARING FOR YOUR RANGE

SEALED SURFACE BURNERS AND COOKTOP (CONT.)

To clean the burners:

1.Pull the burner cap straight up from the burner base.

2.Clean the burner cap with warm, soapy water and a sponge. You can also clean it with a mildly abrasive scrubbing pad or cleanser.

Do not clean the burner cap in a dishwasher or self-cleaning oven.

3.If the gas tube opening has become soiled or clogged, use a cotton swab or a soft cloth to clean the area.

4.If the ports are clogged, clean them with a straight pin. Do not enlarge or distort the

port. Do not use a wooden toothpick. If the burner needs to be adjusted, call a qualified technician for service.

5.After cleaning the gas tube opening and ports,

replace the burner cap. To replace the burner cap, make sure the alignment pins on

the burner cap are properly aligned with the burner base.

6.Turn on the burner to see if it will light. If the burner does not light after you have cleaned it, contact an authorized service technician. Do not service the sealed burner yourself.

REMOVING THE OVEN DOOR

For normal use of your range, you do not need to remove the door. However, if you find it necessary to remove the door, follow the instructions in this section.

NOTE: The oven door is heavy.

Before removing the door:

1.Use a putty knife or screwdriver and insert it at the bottom corner of the door stop clip.

2.Pry door stop clip free and remove from front frame hinge slot. Take care not to scratch porcelain.

3.Repeat procedure for other door stop clip.

Door removal	Door stop clip
pin hole

Range

Hinge	Front frame
hanger	hinge slot

30

Image 30

Contents Self-Cleaning Gas RangeA NOTE TO YOU Please record your model’s informationwDANGER wWARNING RANGE SAFETYTHE ANTI-TIP BRACKET wWARNINGFor self-cleaning ranges RANGE SAFETYIMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONSAutomatic oven light switch p Gasket PARTS AND FEATURESCONTROL PANEL Surface burner marker shows which burner you are settingUsing the control knobs USING YOUR RANGEUSING THE SURFACE BURNERS Burner heat settingsIn case of a prolonged power failure Using the right cookware makes aUSING THE SURFACE BURNERS CONT Home canning informationPositioning racks and pans Rack placement for specific foodsUSING YOUR RANGE Extra oven rack position roasting rackBAKEWARE TYPE USING ALUMINUM FOILBAKEWARE CHOICES BEST USED FORTHE ELECTRONIC OVEN CONTROL Indicator lightsUsing the control lock Display/clockPRESS SETTING THE CLOCKUSING THE ELECTRONIC MINUTE TIMER YOU SEETo cancel the minute timer during the countdown STARTING/CANCELING A FUNCTIONUSING THE ELECTRONIC MINUTE TIMER CONT display counts downFront BAKING/ROASTINGRoasting meats and poultry Rearexample for set temperature of 325F BAKING/ROASTING CONTSaving energy 7. After cooking, turn off the ovenfactory setting of “00” ADJUSTING THE OVEN TEMPERATURE CONTROLHow to determine the amount of adjustment needed example when making oven 10F coolerBROILING Front Rear6. After broiling, turn off the oven Broiling guidelines BROILING CONTTo custom broil at a lower temperature example shows broil at 325FRACK Broiling guidelines contAPPROXIMATE TIME MINUTESThe bake indicator light will light up USING THE AUTO COOKING CONTROLTo start baking/roasting now and stop automatically Food Poisoning Hazard2. Choose the bake setting USING THE AUTO COOKING CONTROL CONTTo delay start and stop automatically display counts down cook timeexample shows 30-minute The start time/delay indicator light will light upexample shows bake at 375F baking/roasting timeTHE OVEN VENT display counts down cooktime Replacing the storage drawer THE STORAGE DRAWERRemoving the storage drawer Lower slide railBurn Hazard Do not touch the oven during the Self-Cleaning cycle BEFORE YOU STARTUSING THE SELF-CLEANING CYCLE Keep children away from oven during Self-Cleaning cycleSETTING THE CONTROLS USING THE SELF-CLEANING CYCLEexample shows 4 1/2-hour cleaning time HOW THE CYCLE WORKS SETTING THE CONTROLS CONTTo stop the self-cleaning cycle at any time TemperatureCLEANING METHOD CLEANING CHARTCARING FOR YOUR RANGE Explosion HazardSurface burners CLEANING CHART CONTCARING FOR YOUR RANGE Oven door glassis blue in color. If the SEALED SURFACE BURNERS AND COOKTOPCleaning the surface burners Porcelain burner cap Burner baseSEALED SURFACE BURNERS AND COOKTOP CONT To clean the burnersREMOVING THE OVEN DOOR Before removing the doorTo replace REMOVING THE OVEN DOOR CONTTo remove while the door is removed from the rangeREMOVING THE OVEN DOOR CONT THE OVEN LIGHTTo replace the oven light Support pinsOVEN/BROILER BURNER TROUBLESHOOTINGRANGE DOES NOT WORK SURFACE BURNERSCOOKING RESULTS WHEN SELF-CLEANING YOUR OVENTROUBLESHOOTING DISPLAY MESSAGESREQUESTING ASSISTANCE OR SERVICE IF YOU NEED ASSISTANCE OR SERVICEIF YOU NEED REPLACEMENT PARTS assist you. When callingPage Page Page INDEX TOPICPAGE WARRANTY GAS RANGE WARRANTYLENGTH OF WARRANTY WHIRLPOOL CORPORATION WILL PAY FOR